Search results

Page 113 of the manual

Bought my car used and it come only with 1 key. So I order 2 blank one on ebay for $40 each. Had a local Locksmith guy come by the office to cut and program both for $100. He did charge sale tax. So the total come out around $190 for 2 keys. Mine has remote start also and both new keys...

No I don't but it should be the same as this one on youtube. However, I didn't remove the center vertical bracket as sheen at 2 minute time in the video. Once you remove the front and back brackets, you should be able to feed the wire thru.

The same pin 4 and 5 as the footwell. I also tap the same pins to the door sill bought from Amazon . This kit came with the 6-pin connector and wires so there is no need to buy it separately from ebay. Saving $7.

I just test pin 5 and 6 and they seem to function the same as 4 and 5. i.e. it come on/off when interior light is on/off. So not sure what is the different.

Check my thread here

Bought the OLIKE from Amazon. The harness come with 6-pin connector that plug direct into the factory one show in my other thread here Installation is real easy, just take your time to route and hide the wires. Took me less than an hour from start to clean up.

Install the Zone Tech bought from Amazon and route the display all the way to the front below the display. Mine is 2016 EX-T

Done adding my foot-well light. Bought the $7 connector from ebay make job much easier. Uses pins 4 and 5 for illuminates together with interior lights or pins 5 and 6 for constant on when car is on

Fuse #21 (Interior Light) in the Engine Compartment Fuse Box which is 10A

Thanks! I update my first post so people can find it easier when needed. You guys are awesome.

Are these the wires you referring to?

According to this thread from enishi

Thanks for your reply. I plan to do some test with a meter and a led bulb to see the output on each pin this weekend.

Hi, can you help me identify this 6-pin connector under the dash on driver side of 2016 Civic EX-T: - What is each pin for? - Where can I buy the male connector and the pin for them? Thanks! I want to add some footwell light and maybe DYI door sill plate later and read on other thread that this...