If you’re handy with electronics you can get an OBDII connector an Arduino nano and MCP2515 board for about $10 bucks and read all the data on the CAN bus. A lot of codes aren’t documented but there is a github project which documents a lot of interesting ones including the speed of each wheel...
I ended up getting the Honda tool for 30 bucks which works better than my gadget, but if you don't want to spend that much I think my gadget works better than the generic tools.
Here you go:
I put universal door cups on my 2018. That car was totaled after some idiot ran a red light and tboned me, it only had 18k miles on it but the front bumper was already showing tons of rock chips, one of the first things I did on my 2019 replacement was to install PPF on the front bummer it was a...
I made some changes to my setup. Went from the single suction cup Uniden mount with mirror tap to a powered magnetic mount that I designed (I extended the design of the magnetic mount from the Radenso DS1).
And after I ran the hardwire to the fusebox I finally implemented the idea I've had...
The part # for the clip that holds the sun visor in place is 88217-TK8-A01ZS:
What is the part # that this attaches to (the plastic piece behind the headliner)?
A friend of mine bought a place near state route 80 (“The Dragons Whip”), did a lot of shopping trips to help get stuff and had a blast just going to and from Walmart on that road. Couldn’t even maintain the 45 mph speed limit a lot of the time ?
I found a dealer I like, I’ve had two oil changes from them so far and they didn’t try and push me for anything other than the oil change, even the last time when the MM was calling for cabin and engine filter changes. I did them myself after the oil change so they were dirty at the time. $35...
I also carry a $0 deductible for comprehensive, for me it was about $80 more per year than a $500 deductible, has always been worth it just for windshield replacements...
In the couple days since I installed the update I’ve seen it get up to 210F a few times in just normal driving, ambient temp in the low to mid 90’s.
My windows started squeaking so I got the Shin Etsu to use for the window tracks, worked great. Also did the seals while I was at it.
The turn signal and high beam switches on my motorcycle were getting extremely hard to operate so took them apart cleaned out all the old grease and gunk and...
I use a maikita vaccume cleaner (18v white one), has really good suction and works well, only negative is the filter cup is a little messy to clean. Have a little leaf blower that uses the same batteries that I use to dry the car after washing and a drill that uses the batteries as well.