Search results

  1. TunerView Lite Now Available For The Head Unit

    You can use it for gauges, no problem.
  2. TunerView Lite Now Available For The Head Unit

    That's the outlined way to transfer the program. If you want to try a different method you're welcome to do so.
  3. Ktuner v2 Recovering ECU! LIMP mode

    You're not in recovery if your engine is running. Hitting yes would begin a recovery flash back to factory. Likely your cable is loose so the ECU did not get a response to some data requests, but did to others, which is how it detects recovery mode.
  4. Emissions systems warning

    No, the software can check and clear codes and the ECU can release codes if it passes certain criteria for a range of time.
  5. Emissions systems warning

    Check the error code next time you get one.
  6. Update on my Boosted K20C2

    Back in the old days you could throw a check valve and a rising rate fuel pressure regulator on a vehicle with a turbo added in order to make it "run". That's not properly tuned, but it will run. I'm sure you can use the KTuner software to alter fuel and ignition timing to make it run, but it...
  7. Ktuner v2 freezing during WOT

    You left your on board logging enabled and it's full. Disable or clear it out.
  8. KTuner V2 screen comes on while car off

    It's an actual touch screen, not capacitive like your phone, so treat it as such. If you swipe as outlined on the tutorial videos it'll change pages as intended. Want something capacitive instead? Get a tablet with the TunerView app and a V1.2
  9. Question: The impact of "Early spool" on the stock system

    Turbo targeting, not the table itself!
  10. Question: The impact of "Early spool" on the stock system

    It affects turbo targeting and won't hurt anything long term.
  11. Ktuner 2 screen blacked out.

    Keep us posted.
  12. KTuner V2 screen comes on while car off

    See the version history to update the V2 firmware and then choose the CAN Gateway option. It will only wake when the ECU is available, not with CAN data in general.
  13. Ktuner app on different computer

    There's info in the helper window when you first launch the software for logging into an existing account. Exactly as above, just plug in the unit after the software is open so it doesn't go to sleep.
  14. KTuner Extended Testing And Tune Results

    Different vehicle with different mods.
  15. KTuner Extended Testing And Tune Results

    The dyno sheet for the PRL Full Bolt-on tune was added to the website.
  16. TunerView Lite Now Available For The Head Unit

    Updated the first post to say 2018+
  17. My KTuner experience - an ongoing journal

    Not really. Everything is straight forward and available here and in the Help!
  18. Help: RPM fluctuation making car jerk on low speed

    We have some datalogs from the customer, but you may be on to something. Loading factory boost levels does not cause the change, so potentially limiting lower gears could add some relief if this is caused by the ECU's boost control which integrates directly with the throttle control.
  19. KTuner V2 screen comes on while car off

    If you don't care what I'm asking, even though I'm trying to help you get this figured out, I'm not sure we're working in the right direction. Quick break down: I gave you specific directions for getting yours tested several posts ago, yet you've not contacted us through email as mentioned...
  20. Help: RPM fluctuation making car jerk on low speed

    Dial back your quick adjustments to something that works for you. One of your starting tunes is labeled beta, which is the one you're complaining about. If you're unhappy with the beta option, don't use it. Use the non-beta option instead. Thanks for sharing!
Top