27WON Front Strut Tower Bar

Vincent@27WON · Jan 6, 2020

Chuckafied said:
So excited for this. Can’t wait for release

we are looking forward to this one as well. hopefully not too much longer, we just have so many products going on right now.

Fit2Hatch · Feb 10, 2020

Whatever you do juggling all your proposed products, I hope you address with better flange fasteners for the Tower Bar when it is released..

I have been holding out, since all the existing one piece bar using existing OEM fastener has thread below the top on the fasteners. Which is undesirable and a violation to the existing fastener engagement standard.

What sold me on your exhaust was the use of step nuts.

The Vyzitor · Feb 29, 2020

Can we preorder this? When are they shipping?

Shankmeyster · Feb 29, 2020

When and cost are the 2 biggest questions at the moment.

Oberlieutenant · Mar 6, 2020

Care to elaborate on "... violation to the existing fastener engagement standard..."?

I've been building cars my entire life and I've never heard this phrase before.

Fit2Hatch · Mar 6, 2020

Standard is:- after fastener is torqued to spec., there should have thread protrusion above top of fastened nut - in order to satisfied safety margin, having total thread engagement, enabling proper total stretch of mating interface of fasten components.

I am/was referring to a few member using a one piece brace from another brand, after torqued, thread is well below OEM flange nut.

However, earlier picture on this thread shown the pre-production 27WON model has ideal thread protrusion.

I am happily retired and not gonna elaborate what my past life was.

j_vang · Mar 7, 2020

Was just notified that Tanabe is out of stock but luckily I ran across this thread today. Will be waiting patiently for this one.

Oberlieutenant · Mar 8, 2020

Fit2Hatch said:
Standard is:- after fastener is torqued to spec., there should have thread protrusion above top of fastened nut - in order to satisfied safety margin, having total thread engagement, enabling proper total stretch of mating interface of fasten components.

I am/was referring to a few member using a one piece brace from another brand, after torqued, thread is well below OEM flange nut.

However, earlier picture on this thread shown the pre-production 27WON model has ideal thread protrusion.

I am happily retired and not gonna elaborate what my past life was.

No offense - I'm not interested in your past life.

I was asking for elaboration on the technical term you used, which I had never heard before.

However, you did provide a pretty good explanation, and I thank you for that! Cheers!

Tw1tcHy · Mar 13, 2020

Oberlieutenant said:
No offense - I'm not interested in your past life.

I was asking for elaboration on the technical term you used, which I had never heard before.

However, you did provide a pretty good explanation, and I thank you for that! Cheers!

I don't know, not to sound rude to him or anything but it just kinda sounded like a lot of words to simply say "the threads on a different STB don't fully engage on the nut which raises some safety and mechanical integrity concerns"

Hollywoo0220 · Mar 13, 2020

Question:
The "Bar" alone is not beneficial without improving the suspension and/or springs or both correct?

TypeSiR · Mar 13, 2020

Hollywoo0220 said:
Question:
The "Bar" alone is not beneficial without improving the suspension and/or springs or both correct?

No, a FSB helps to reduce body roll and makes the car more rigid. However, the CTR already has a rigid chassis so there's little to gain by adding a FSB. It's still better (a little) than not having one.

cammyfive · Mar 23, 2020

Any update on release date for this FSTB? I'm assuming it work on the Si as well as the CTR, right? I only ask as I've seen some CTR folks commenting in here.

Vincent@27WON · Mar 24, 2020

cammyfive said:
Any update on release date for this FSTB? I'm assuming it work on the Si as well as the CTR, right? I only ask as I've seen some CTR folks commenting in here.

Working on some beta testing right now. No major updates just putting miles on the bars to make sure they handle the loads and stress.

Our unique design will allow us to run on any 10th gen Civic.

cammyfive · Mar 26, 2020

Vincent@27WON said:
Working on some beta testing right now. No major updates just putting miles on the bars to make sure they handle the loads and stress.

Our unique design will allow us to run on any 10th gen Civic.

Thanks for the quick reply! I look forwarding to getting it.

cammyfive · Apr 1, 2020

Oh, don't mind me.....it's just 3:57 am EST on a Friday and I'm checking back in to see if I missed anything on the FSTB updates.

27WON Front Strut Tower Bar

Vincent@27WON

REDEFINE the Aftermarket

Fit2Hatch

Senior Member

The Vyzitor

Senior Member

Shankmeyster

Senior Member

Oberlieutenant

Member

Fit2Hatch

Senior Member

j_vang

Senior Member

Oberlieutenant

Member

Tw1tcHy

Member

Hollywoo0220

Customer Service oriented (most of the time) :-)

TypeSiR

Senior Member

cammyfive

Senior Member

Vincent@27WON

REDEFINE the Aftermarket

cammyfive

Senior Member

cammyfive

Senior Member

Similar threads