Kekela98a
Senior Member
- Joined
- Aug 16, 2019
- Threads
- 22
- Messages
- 262
- Reaction score
- 121
- Location
- New York
- Vehicle(s)
- 2019 CTR
- Thread starter
- #1
Just got my Xpel ppf done on the type r about 2-3 weeks ago and noticed a few small issues. Eg. passenger mirror cap film was coming off at a corner, hood scoop was machine cut and not fully wrapped, both headlights had a large corner that the film was sticking to by lower corner). Took it back to the shop and was told that it wasn’t a problem and leave the car there.
Picked it up today with the following results:
1. Passenger mirror film fixed.
2. Scoop left the same because of the contour of the scoop. Installer said he can’t fully wrap it.
3. Non adhered areas on both headlights were cut out with a razor blade. One corner has a razor cut to the headlight...
Spoke to the installer on the phone and he promises he can fix this issue...
This is frustrating because the point of ppf was to protect the car not cause damage. Turns out the shop I used actually uses a general Xpel installer.
Paid 1800 for the “seamless” wrap and 600 for a car pro ceramic silver package.
Picked it up today with the following results:
1. Passenger mirror film fixed.
2. Scoop left the same because of the contour of the scoop. Installer said he can’t fully wrap it.
3. Non adhered areas on both headlights were cut out with a razor blade. One corner has a razor cut to the headlight...
Spoke to the installer on the phone and he promises he can fix this issue...
This is frustrating because the point of ppf was to protect the car not cause damage. Turns out the shop I used actually uses a general Xpel installer.
Paid 1800 for the “seamless” wrap and 600 for a car pro ceramic silver package.