What strut bar is that?I finally got around to installing mine. I was so happy after a long install, but then I realized I forgot to add the gasket.....how essential is it? I’d hate to have to take everything apart again.
Cusco
You’ll see it when you install it. That space is needed to clear the actuatorHello friends! I got my turbo inlet pipe today and am super excited to install it. Question for those of you that received yours: are these divots in the elbow piece normal? If so, I wonder what purpose they serve.
Related question: if I wanted to burn some colors into the titanium, is there a way to control what colors I get?
i'm not really too sure about that. Maybe if you can control the temperature?
Thanks for inquiring! Our ETA is February for our inlet piping, no exact date just yet but we will be letting everyone know soon on that as well.
I have a 2017 and it was definitely a 12 on mine too.Good afternoon guys. Just wanted to give you all a heads up. I'm currently installing this on a bone stock 2019 ctr and the instructions on the FB page say that the bolts that hold on to the elbow are 14mm. The bolts that are on the 2019 are definitely 12mm. There might have been a change from the 2017 model to the 2019 model. I also unclasped the small black rubber hose on the plastic wiring harness to give more slack. This made getting to the bottom bolt much easier to get too.
We have had a customer confirm fitment with the Gruppe M intake system with modification of the inlet hose, but we can pretty much guarantee that this will not fit any other intake systems. Our kits have two hose options; stock air box and HVI, both of different angle and length. Unless the MAF Housing is similar diameter and location to either our HVI or the stock air box, the inlet pipe will not fit.
