Also consider using the Hondata support forums first, here second. Also call the support number. If this is a real issue on some ECUs others would like to know.@Hondata
Hey Hondata, I flashed my car back to factory using online - restore factory
Car now now constantly has brake hold and traction light, engine is barely running (cant go past 14kmh) and the car keeps acting like it's about to stall.
Flash pro and ecu is now not being detected.i dont know what to do
Thanks for the advice. I will go to Hondata website (reinstalled flahspro and I can flash it again so I'll see what happens)Also consider using the Hondata support forums first, here second. Also call the support number. If this is a real issue on some ECUs others would like to know.
Lol I like watching people's pulls in 4th gear to determine if they've got more power or not. If their speedo refreshes by 2's or up to 4 at a time I can bet it's not. Mine usually refreshes by 5 between 80mph-110ish. Sometimes I get lucky and it increases by 6 at a timeJust wanted to chime in. This morning I was continuing to refine my tune (93 with light mods) and I happened to log some runs in 3rd from 20mph to the top of the gear. It’s 20 degrees out, running 93, traction control on (Hondata + vsa). All right before it snowed (yay).
I remember one log file I had looked at was too short for my needs and I deleted it but remember seeing the acceleration times, and I kept it in my head thinking - cool. You know, started off slow as heck in third and just wanted to record that power take me out to paradise. I do remember the run and it was fast.
Anyways, I’m watching this YouTube video of an R and he’s driving hard starting at 2500 in 2nd all the way through 3rd and to the middle of 4th.
That’s when it hit me, holy sh$t. My car is really fast...
Get a hold of windows 10 install online and create a bootable USB stick that will run the install. Your Windows Home key should be embedded in the bios of S machines. Otherwise you can get a legit key online for super cheap.can i run the hondata flaspro software on a laptop with windows 10 in S mode, or does it have to be home?
Just to be clear, I bought a windows S laptop. But installed windows 10 Pro on it. Everything works great.Thanks for the replies. I was wondering because I haven’t gotten a hold of a laptop yet but was searching around and typically the lower us get laptops are running win10 in S mode. I’ll look for a win home laptop then! Thanks y’all.