Titan7 Track Wheels : Civic Type R FK8

Got my "stig" spec reverse staggered titan 7 wheels in today and had them mounted right away.

Yokohama A052's 295/35/18 in the front and 265/35/18 in the rear.

I would be lying if I said the wheels are not close to the wheel well. I am however lowered on JRZ coils.

Going to run these on 12/28 at laguna. Will probably put more camber in the front.

What Honda center caps look good with the satin titanium finish? 58mm right? Anyone able to provide a link?

Stock Suspension, +45 offset with 265/35/18 Michelin PS A/S 3+

More photos for those who are more curious about the fitment, etc...

Anyone know if they ever did Technica Bronze in +35 on the T-S5?

mchen397 said:

More photos for those who are more curious about the fitment, etc...

Click to expand...

Hey, thanks for the pics. I'm waiting on my set of 18" TS5's in Techna B. to come in for my black car. Don't plan on lowering it as the roads are crap around here and winter compounds that.

jonnys_honda said:

From their site:
"TITAN 7 T-S5 is a fully forged wheel designed completely with performance in mind. Pressurized with 10,000 TONS of industry leading pressure to give you a wheel that is incredibly strong while giving you all of the performance attributes you need in a track focused wheel. Upon close inspection you will notice strength adding ridges which have been strategically placed to give the wheel rigidity while keeping weight to a minimum. The split 5 spoke design was chosen for its motorsports heritage and track worthy structure. Each wheel from Titan 7 features traction improving bead seat knurling, beefed up inner rim flange for durability and strength, and logo machined accents. The T-S5 is designed for each application to clear all popular after market big brake kits while achieving maximum concavity. All wheels are durability tested according to JWL standards to ensure safety while you perform. Authentic performance from Titan 7. Forged for All."

https://titan-7.com/collections/whe...ged-split-5-spoke-wheel?variant=5005716357148

Installed over the weekend. Then immediately tested on the track at Willow Springs Raceway.
How they looked wrapped in RE-71R 255/35 and lowered on Eibach Pro-Kit.
No rubbing under hard cornering.

Click to expand...

What color is this OP civic type R? Can’t really tell if it’s white or the sonic gray

teemmy said:

What color is this OP civic type R? Can’t really tell if it’s white or the sonic gray

Click to expand...

it's the Sonic Gray Pearl color.

I posted this in another thread but hopefully we will get plenty of support on this..

I have recently got in contact with the guys at Titan 7 and are considering making Type-R wheels in 18x8.5 ET60 5x120. It can be done. They want to make sure there is plenty of interest to go into full production for these wheels. I believe one production run is 20 wheels (or 20 sets) either way this isn't a lot!

If you got a moment please send them a quick message on their Facebook and show them you got interest and are actually wanting to buy! Don't spam them just to them! Just send a quick message saying you are looking for these wheels and thank them for considering our request.

18x8.5 ET60 5x120

https://www.facebook.com/titan7wheels/

mchen397 said:

it's the Sonic Gray Pearl color.

Click to expand...

It’s not, it’s a vinyl wrap if I remember right.

Ouhei said:

It’s not, it’s a vinyl wrap if I remember right.

Click to expand...

It's a wrap it's in his build thread. Pee-free's build

https://www.civicx.com/threads/peef...thread-track-street.34621/page-10#post-661961

I have my doubts that the Et 60 18x8.5 will fit

Has I have seen braid wheels in that spec.... does not fit. But at a slightly lower off set they do fit

Maximum6 said:

I have my doubts that the Et 60 18x8.5 will fit

Has I have seen braid wheels in that spec.... does not fit. But at a slightly lower off set they do fit

Click to expand...

How did they not fit? What was getting in the way?

CrossOut said:

How did they not fit? What was getting in the way?

Click to expand...

https://www.civicx.com/threads/braid-full-race-ac-wheel.16391/

Correction, I have seen 18x8 wheel in et 60 not fit

Again it will be based on the style of wheel and really ultimately have them make a wheel template and test fit

Maximum6 said:

https://www.civicx.com/threads/braid-full-race-ac-wheel.16391/

Correction, I have seen 18x8 wheel in et 60 not fit

Again it will be based on the style of wheel and really ultimately have them make a wheel template and test fit

Click to expand...

Titan 7 said they would have no issues creating a contour specifically for the Type-R such that Fitment would not be an issue. They have already done this with the BMW m3 competition. The main thing now would be to get enough interest and support for them to do a production run.