PRL Motorsports 1.5T Civic Billet Intercooler Upgrade

OP
OP
PRL Motorsports

PRL Motorsports

Premium Performance Products
Elite Sponsor
Joined
Jan 26, 2017
Threads
113
Messages
1,575
Reaction score
4,325
Location
Export, PA
Website
prlmotorsports.com
Vehicle(s)
2017 Civic Si, 2016 Civic EX-T, 2018 Type R
Country flag
See I was about to get all cranky that I wasn't gonna be able to put this on for another week or two but you post these pictures...:love:

And the dash numbers for the O-rings and everything!! Dude, the engineering that went into this is awesome. I'm so happy I went with PRL.
We're glad to hear that! :)
Sponsored

 

Nitori

Senior Member
Joined
Apr 17, 2019
Threads
7
Messages
73
Reaction score
79
Location
Arizona
Vehicle(s)
2019 Civic Si Sedan, 2016 Toyota Tacoma
Country flag
Just got it, super stoked but... small problem.

FedEx was equally hyped to admire the billet endtanks that they kicked open the corner of the box and ripped all the box staples fully out. :flame:

Fins are all OK, there's a small nick in one of the end tanks but it's small sub 1/8" size cosmetic damage because PRL packed it so well.

Gonna shoot you guys a PM real quick to make sure everything inside is accounted for.:cry:

Honda Civic 10th gen PRL Motorsports 1.5T Civic Billet Intercooler Upgrade IMG_2946.JPG
 
OP
OP
PRL Motorsports

PRL Motorsports

Premium Performance Products
Elite Sponsor
Joined
Jan 26, 2017
Threads
113
Messages
1,575
Reaction score
4,325
Location
Export, PA
Website
prlmotorsports.com
Vehicle(s)
2017 Civic Si, 2016 Civic EX-T, 2018 Type R
Country flag
Just got it, super stoked but... small problem.

FedEx was equally hyped to admire the billet endtanks that they kicked open the corner of the box and ripped all the box staples fully out. :flame:

Fins are all OK, there's a small nick in one of the end tanks but it's small sub 1/8" size cosmetic damage because PRL packed it so well.

Gonna shoot you guys a PM real quick to make sure everything inside is accounted for.:cry:

IMG_2946.JPG
Sorry to hear this, we have replied! :)
 

Nitori

Senior Member
Joined
Apr 17, 2019
Threads
7
Messages
73
Reaction score
79
Location
Arizona
Vehicle(s)
2019 Civic Si Sedan, 2016 Toyota Tacoma
Country flag
Alright, time for an update / write up / review of this IC!

First off, PRL replied to me very promptly and made sure all the box contents were present and accounted for.

So then, after taking off my bumper we see... the old IC, an Agency Power unit that fits well enough and I am happy with:

Honda Civic 10th gen PRL Motorsports 1.5T Civic Billet Intercooler Upgrade IMG_2967.JPG


Cast end tanks, fits well enough, I would say a solid 7/10 product. Nothing amazing, interestingly designed with a thin top section to add a lot of surface area.

Well, it's a night and day difference when you lay it down next to the PRL unit:

Honda Civic 10th gen PRL Motorsports 1.5T Civic Billet Intercooler Upgrade IMG_2970.JPG


(Keep in mind that at this perspective you are only looking at the thin top section of the Agency Power)
There's absolutely no comparison with the end tanks and weld quality, PRL comes out on top.
First thing I noticed was that despite the way beefier core, the PRL unit only weighs about 1/2 a pound more than the Agency Power.
Breaking down the frontal surface/volume numbers, the PRL unit has 106% of the AP's internal volume, but only 86% of the frontal surface area.
Frontal surface isn't the be all end all though, because as far as cross section for airflow to go through the PRL is ~117% of the AP's airflow cross section.
I won't bog this any further down into the theory of Intercooler design, but basically what this means is while the Agency Power has the potential to catch more ambient air across the front, the PRL unit is going to flow better and has more air in contact with cooling fins.

Just look at how smooth the airflow transitions into the core though:

Honda Civic 10th gen PRL Motorsports 1.5T Civic Billet Intercooler Upgrade IMG_2973.JPG


And on exit it's the same story:

Honda Civic 10th gen PRL Motorsports 1.5T Civic Billet Intercooler Upgrade IMG_2976.JPG


Agency power's offering kind of falls flat compared to the PRL. As a result I am almost certain pressure drop across the PRL unit is going to be remarkably better than Agency Power, which is already better than stock.

Installation itself is trivial, PRL has really paid attention to all the details here. Nothing needs to be "massaged" into place, nothing rubs, and this little detail blew me away:

Honda Civic 10th gen PRL Motorsports 1.5T Civic Billet Intercooler Upgrade IMG_2981.JPG


PRL even paid attention to the fact that the A/C Condenser gets close to the endtank here and there's a little cut in relief to make sure clearance is plentiful. I've been around the automotive aftermarket long enough to know that little details like this are often overlooked or just straight up ignored in favor of an "oh well, it might rub" attitude.

Possibly the most questionable thing about the whole install was my quick and dirty rattle can of bedliner on the air guides to black them out:

Honda Civic 10th gen PRL Motorsports 1.5T Civic Billet Intercooler Upgrade IMG_2968.JPG


I didn't realize until after painting and as I was installing that there was one small casualty of the shipping, and it was a little mounting tab on the airguide being slightly bent. A gentle pull with some channel locks sorted it right out.

But, now my bumper is ready to go back on:

Honda Civic 10th gen PRL Motorsports 1.5T Civic Billet Intercooler Upgrade IMG_2985.JPG


I can't say enough how awesome this intercooler turned out, I am so happy with the results and PRL!!

I'm gonna go ahead and say it. 10/10 product and hands down the best, absolute best intercooler on the market right now. :thumbsup::thumbsup::bow:
 

P51

Member
First Name
Eric
Joined
Dec 1, 2019
Threads
0
Messages
6
Reaction score
6
Location
Southern Calif.
Vehicle(s)
2017 Civic Hatchback LX
Country flag
Just finished up my install, with a few pieces of constructive criticism. I followed the installation instructions at: https://prlmotorsports.com/document...Civic 1.5T Billet FMIC Installation Guide.pdf

1. The two stock M6 bolts shown on step 13 cannot be reused with the PRL kit because they are too long. I used two M6x10mm hex bolts out of my parts bin. I am not sure if the PRL kit includes bolts of the correct length.

2. Steps 18 and 19 provide almost no guidance for assembling the upgraded charge pipes. For the hot side pipe, there was no good way to tell which end goes to the turbo and which end goes to the IC.

3. Some of the silicone hoses were very difficult to slip on. For me, it was the upper hot side coupler to the hot pipe, and the charge pipe adapters. I resorted to one or all of the following: molybendum grease, heat gun to the silicone, carefully chamfering the mouth of the silicone, and herculean strength.

4. Considering the difficulty above, I recommend you slip on the adapters before you put the piping into the engine bay. The pictures shown on sheet 12 of 15 suggest that you should install the adapters onto the intercooler first, then slip them into the silicone.


The following is for those trying to use this kit in conjunction with a 27Won cold air intake:

27Won has stated in their sponsor forum that the airbox and the cold side pipe will be a tight fit, but workable together if you "massage" things. The conflicts are more significant than that. I managed to create a tiny bit more room by redrilling the ECU holder to shift it slightly more towards the drivers side. I also replaced the included M6 male x male rubber vibration mounts with male x female. I could only bolt the brackets to the airbox at 2 places instead of 4. In my opinion, these items will not go together unless you deviate from the standard parts/installation procedures.
 


OP
OP
PRL Motorsports

PRL Motorsports

Premium Performance Products
Elite Sponsor
Joined
Jan 26, 2017
Threads
113
Messages
1,575
Reaction score
4,325
Location
Export, PA
Website
prlmotorsports.com
Vehicle(s)
2017 Civic Si, 2016 Civic EX-T, 2018 Type R
Country flag
Alright, time for an update / write up / review of this IC!

First off, PRL replied to me very promptly and made sure all the box contents were present and accounted for.

So then, after taking off my bumper we see... the old IC, an Agency Power unit that fits well enough and I am happy with:

IMG_2967.JPG


Cast end tanks, fits well enough, I would say a solid 7/10 product. Nothing amazing, interestingly designed with a thin top section to add a lot of surface area.

Well, it's a night and day difference when you lay it down next to the PRL unit:

IMG_2970.JPG


(Keep in mind that at this perspective you are only looking at the thin top section of the Agency Power)
There's absolutely no comparison with the end tanks and weld quality, PRL comes out on top.
First thing I noticed was that despite the way beefier core, the PRL unit only weighs about 1/2 a pound more than the Agency Power.
Breaking down the frontal surface/volume numbers, the PRL unit has 106% of the AP's internal volume, but only 86% of the frontal surface area.
Frontal surface isn't the be all end all though, because as far as cross section for airflow to go through the PRL is ~117% of the AP's airflow cross section.
I won't bog this any further down into the theory of Intercooler design, but basically what this means is while the Agency Power has the potential to catch more ambient air across the front, the PRL unit is going to flow better and has more air in contact with cooling fins.

Just look at how smooth the airflow transitions into the core though:

IMG_2973.JPG


And on exit it's the same story:

IMG_2976.JPG


Agency power's offering kind of falls flat compared to the PRL. As a result I am almost certain pressure drop across the PRL unit is going to be remarkably better than Agency Power, which is already better than stock.

Installation itself is trivial, PRL has really paid attention to all the details here. Nothing needs to be "massaged" into place, nothing rubs, and this little detail blew me away:

IMG_2981.JPG


PRL even paid attention to the fact that the A/C Condenser gets close to the endtank here and there's a little cut in relief to make sure clearance is plentiful. I've been around the automotive aftermarket long enough to know that little details like this are often overlooked or just straight up ignored in favor of an "oh well, it might rub" attitude.

Possibly the most questionable thing about the whole install was my quick and dirty rattle can of bedliner on the air guides to black them out:

IMG_2968.JPG


I didn't realize until after painting and as I was installing that there was one small casualty of the shipping, and it was a little mounting tab on the airguide being slightly bent. A gentle pull with some channel locks sorted it right out.

But, now my bumper is ready to go back on:

IMG_2985.JPG


I can't say enough how awesome this intercooler turned out, I am so happy with the results and PRL!!

I'm gonna go ahead and say it. 10/10 product and hands down the best, absolute best intercooler on the market right now. :thumbsup::thumbsup::bow:
Awesome, thank you so much for your support and feedback. We hope you enjoy it! :thumbsup:

Just finished up my install, with a few pieces of constructive criticism. I followed the installation instructions at: https://prlmotorsports.com/documents/instructions/2016 Honda Civic 1.5T Billet FMIC Installation Guide.pdf

1. The two stock M6 bolts shown on step 13 cannot be reused with the PRL kit because they are too long. I used two M6x10mm hex bolts out of my parts bin. I am not sure if the PRL kit includes bolts of the correct length.

2. Steps 18 and 19 provide almost no guidance for assembling the upgraded charge pipes. For the hot side pipe, there was no good way to tell which end goes to the turbo and which end goes to the IC.

3. Some of the silicone hoses were very difficult to slip on. For me, it was the upper hot side coupler to the hot pipe, and the charge pipe adapters. I resorted to one or all of the following: molybendum grease, heat gun to the silicone, carefully chamfering the mouth of the silicone, and herculean strength.

4. Considering the difficulty above, I recommend you slip on the adapters before you put the piping into the engine bay. The pictures shown on sheet 12 of 15 suggest that you should install the adapters onto the intercooler first, then slip them into the silicone.


The following is for those trying to use this kit in conjunction with a 27Won cold air intake:

27Won has stated in their sponsor forum that the airbox and the cold side pipe will be a tight fit, but workable together if you "massage" things. The conflicts are more significant than that. I managed to create a tiny bit more room by redrilling the ECU holder to shift it slightly more towards the drivers side. I also replaced the included M6 male x male rubber vibration mounts with male x female. I could only bolt the brackets to the airbox at 2 places instead of 4. In my opinion, these items will not go together unless you deviate from the standard parts/installation procedures.
Thank you for your feedback as well!

Unfortunately there were a few kits that managed to get shipped that were missing (2) M6 x 12mm flange bolts for the charge pipe bracket, and it sounds like your kit was one of those. If anybody is in need of either of these, feel free to reach out to us via email or phone to receive them. However, any M6 x 1.00 x 1.25 bolt will work in a pinch.

We apologize about any confusion/difficulty, but thank you for bringing this to our attention. We will make a few revisions to our instructions to add clarity! And yes, the silicone is a very snug fit. :)

Also, thank you for the feedback regarding fitment with the 27Won Intake.
 

P51

Member
First Name
Eric
Joined
Dec 1, 2019
Threads
0
Messages
6
Reaction score
6
Location
Southern Calif.
Vehicle(s)
2017 Civic Hatchback LX
Country flag
I'm very happy with the interoocler and I appreciate all the clever touches that @Nittori and others pointed out. The butt dyno says there's a nice difference.
 

trapbryan

Senior Member
First Name
Bryan
Joined
Jul 22, 2019
Threads
6
Messages
225
Reaction score
453
Location
Miami, FL
Vehicle(s)
2019 Civic SI Coupe
Country flag
Probably a really dumb question
But how do I go about getting the prl logo on my intercooler? Do I just spray paint it on through the stencil ?
 

Eleon

Senior Member
First Name
Eddie
Joined
Mar 6, 2019
Threads
6
Messages
57
Reaction score
43
Location
Denver
Vehicle(s)
2018 Honda Civic Si
Country flag
Probably a really dumb question
But how do I go about getting the prl logo on my intercooler? Do I just spray paint it on through the stencil ?
Chad Miedel at PRL gave me some pointers:

We suggest going with a high temp ceramic engine enamel. Duplicolor DE1635 is the brand and number we use. The black is the Ford Semi Gloss Black.

This will be the most resistant to temperature and wear. You can choose any color you wish, but black usually is the go to. Recommend taping the stencil on and masking off the end tanks to avoid any overspray. If you make any mistakes or get runs/drips acetone or brake cleaner can be used to remove any paint from the intercooler. Thanks for representing us, we appreciate it, if you have any further questions or seeking guidance with your vehicle let us know!

-Chad
 

trapbryan

Senior Member
First Name
Bryan
Joined
Jul 22, 2019
Threads
6
Messages
225
Reaction score
453
Location
Miami, FL
Vehicle(s)
2019 Civic SI Coupe
Country flag
Chad Miedel at PRL gave me some pointers:

We suggest going with a high temp ceramic engine enamel. Duplicolor DE1635 is the brand and number we use. The black is the Ford Semi Gloss Black.

This will be the most resistant to temperature and wear. You can choose any color you wish, but black usually is the go to. Recommend taping the stencil on and masking off the end tanks to avoid any overspray. If you make any mistakes or get runs/drips acetone or brake cleaner can be used to remove any paint from the intercooler. Thanks for representing us, we appreciate it, if you have any further questions or seeking guidance with your vehicle let us know!

-Chad
Thank u so much!
 


arnoldo

Senior Member
First Name
Arnoldo
Joined
Nov 28, 2019
Threads
19
Messages
558
Reaction score
396
Location
Jakarta, Indonesia
Vehicle(s)
2019 Honda Civic Hatchback
Country flag
I plan to purchase PRL IC upgrade without the charge pipe to replace the crappy HKS R-TYpe Intercooler.

I select the IC upgrade without piping combo because I have no plan to upgrade to bigger turbo than hybrid TD03 I currently have & pressure drop is less than 1 PSI with current setup.

I have 2 questions to help me decide if I need upgraded charge pipe:
  • How significant the cooling performance difference between IC upgrade alone and IC & charge pipe upgrade?
  • What would be the estimated pressure drop range if I only upgrade the IC without the charge pipe?
I know there are 3 PRL authorized dealer in Indonesia but they only have the combo kit so I have no choice but to order directly from PRL.

Looking forward to hearing back from you @PRL Motorsports
 

arnoldo

Senior Member
First Name
Arnoldo
Joined
Nov 28, 2019
Threads
19
Messages
558
Reaction score
396
Location
Jakarta, Indonesia
Vehicle(s)
2019 Honda Civic Hatchback
Country flag
Just wanna share that I send an email to PRL team. PRL customer service team response promptly and provide information and suggestion. In summary, IC width plays important role in pressure drop & radiator access to air. Consumers who live in hot climate would benefit from upgraded charge pipe from cooling standpoint because PRL 4 ply silicone could help reduce heat soak vs. factory 2 ply.

Unfortunately PRL no longer offer combo deal but this is understandable considering increased cost of materials and processes.

Thanks for the information and the great customer service! @PRL Motorsports
 

aheedc

New Member
First Name
Aheed
Joined
Feb 28, 2022
Threads
0
Messages
2
Reaction score
0
Location
Connecticut
Vehicle(s)
2018 Honda Civic Si Coupe
Country flag
Hey guys! Is there significant performance difference between the PRL V1 and V2 intercoolers? I have the opportunity to by a v1 with charge pipe for half as much a a brand new v2. I’m wondering if it’s worth it or if I should just get the newest one.

Thanks!
Sponsored

 


 


Top