DallasCRX
Senior Member
- First Name
- Dallas
- Joined
- Sep 24, 2018
- Threads
- 4
- Messages
- 204
- Reaction score
- 251
- Location
- Barrie, ON
- Vehicle(s)
- 1980 Honda GL1100 GoldWing Interstate, 1986 Honda CRX Si, 2009 Honda CRF250X, 2009 Aprilia Shiver, 2010 Nissan Frontier, 2019 Honda Civic Si Coupe
- Thread starter
- #1
I'll be documenting the process to swap the front garnishes from a 2020 Si/5D to my '19 Si. Started posting about it in the TYP Colour thread but felt like the wrong place. This will not cover similar activity with a pre-20 5D with HS. I don't know what, if anything, changes with this process with the Honda Sensing Models. Right side should be the same, but left side is where the camera is.
Parts Required:
Horn Resonator 38104-TGG-000 (required to keep horn at acceptable volume behind the new garnish)
Radar Cover 71119-TGG-A50
Garnishes are 71113-TGG- and 71118-TGG- and the last section of the part number depends on the colour as the moldings come pre-assembled to the garnish. Can be ordered in any 2020 2D/4D Si or 5D colour...
A050ZA - RR
A050ZB - PWP
A050ZC - SGP
A050ZD - LSM
A050ZE - PMM
A050ZF - CBP
A050ZG - ABM/BSBM
A050ZL - MSM
Still waiting for the right side garnish to come in but the left side showed up this week. Ordered in CBP and swapped over my TYP hockey stick. Also had to order the radar cover and horn resonator for the swap (part numbers above).
There are three screws on the back of the molding and three tabs that clip to the garnish. This step isn't required unless you're swapping out for another colour (EGP would be col to see!). I've ordered some 3M clear wrap to wrap them before going on the car as well. I expect not long before somebody tries a carbon wrap on the molding, or something. Don't try prying them out from the front!
Below is the horn resonator, it will secure to the back side of right side garnish with three screws.
Hoping the right side shows up this week and will post up more.
Parts Required:
Horn Resonator 38104-TGG-000 (required to keep horn at acceptable volume behind the new garnish)
Radar Cover 71119-TGG-A50
Garnishes are 71113-TGG- and 71118-TGG- and the last section of the part number depends on the colour as the moldings come pre-assembled to the garnish. Can be ordered in any 2020 2D/4D Si or 5D colour...
A050ZA - RR
A050ZB - PWP
A050ZC - SGP
A050ZD - LSM
A050ZE - PMM
A050ZF - CBP
A050ZG - ABM/BSBM
A050ZL - MSM
Still waiting for the right side garnish to come in but the left side showed up this week. Ordered in CBP and swapped over my TYP hockey stick. Also had to order the radar cover and horn resonator for the swap (part numbers above).
There are three screws on the back of the molding and three tabs that clip to the garnish. This step isn't required unless you're swapping out for another colour (EGP would be col to see!). I've ordered some 3M clear wrap to wrap them before going on the car as well. I expect not long before somebody tries a carbon wrap on the molding, or something. Don't try prying them out from the front!
Below is the horn resonator, it will secure to the back side of right side garnish with three screws.
Hoping the right side shows up this week and will post up more.
Last edited: