.grimace
Senior Member
- First Name
- Byron
- Joined
- Nov 9, 2017
- Threads
- 49
- Messages
- 1,796
- Reaction score
- 1,348
- Location
- Reno, NV
- Vehicle(s)
- 2021 Honda CTR, 2022 Range Rover , 1990 CRX SI
- Thread starter
- #1
Anyone else tired of rocks in their front brakes? I got tired of digging them out and designed a front brake shield. The current one is just 3D printed but decided to get it made out of metal and powder coated now that I know it works. I had a few fellow CTR owners ask if I'd make extras because its such an annoying issue. Figured I'd post this here before having them made. Any interest in this front brake rock shield? Works great and bolts up using two OEM bolts up front no modifications needed. I was worried it'd be blocking lots of hot air leaving the hub/ rotor but have done a track day on them and noticed no change to my brakes.
Again the proof of concept I made is 3D printed but the real ones will be metal and powder coated black. Could maybe do another color if there is enough interest but wasn't sure anyone else wanted these. I was just tired of my brakes sounding like they were metal on metal all the time. Unless we get quite a few people to lower the cost it'd be $150/ set shipped in the US, could do international too but would be a bit more for shipping.
Again the proof of concept I made is 3D printed but the real ones will be metal and powder coated black. Could maybe do another color if there is enough interest but wasn't sure anyone else wanted these. I was just tired of my brakes sounding like they were metal on metal all the time. Unless we get quite a few people to lower the cost it'd be $150/ set shipped in the US, could do international too but would be a bit more for shipping.