HFP hatchback spoiler

I just got my HFP spoiler and I am wondering if anyone had gotten one (on their own), and where it was made?

I will hopefully be installing this within 2 weeks or so. Have other stuff I want to install but have yet to get to.

I will update this thread when I install it.

I would give this install 3/10 ease. Probably a 2. But main 2 things you need is needle nose plier and also a longer type of ratchet to get to the only 2 spoiler bolts. Don’t be stubborn, get the correct damn tools.

But super clean, super easy. Oem Honda fitment. Really recommend.

I went with the crystal black to match the lip kit on the sport touring. My car is blue.

Closing up the thread. When doing the install, if one of the clips fall thru...you need to remove the panels to get them.

Open the trunk. Pull the 2 handle covers off. Take out 2 10mm bolt per side.

Take off the 2 black clips in the middle near the lock.

Start with piece at the rear of the glass. (Near the washer fluid thing)

Work on the 2 side pieces and then you get to the main part near the lock mechanism.

You do NOT Need to pull the whole thing off. Kind of let it just dangle. Just disengage the clip and disconnect them enough so you can reach your hand behind. It will most likely fall to the very bottom.