Hardwiring Viofo A129 Dashcam with Parking Mode

Hi all,

I've bought Viofo Duo A129 Dashcam with 3 wire hardwiring kit for parking mode. It has voltage cutoff.

I plan tapping into fuse #1 ACC 10AMP fuse for IGNITION/ACC

but I don't know which fuse to tap for constant power ON. Can someone please guide me?

2018 Civic sedan SE (with Driver assistant aids package)

buy an inexpensive multimeter and play around with the ignition switch to figure out which one is ACC or constant. Point the black to any factory ground points and the red to the slots in the kicker fuse box. Get a multimeter just to verify the information you get off the internet. You don't want to mess around with 12v blindly

I’m pretty sure I used the power door locks for mine.

thanks guys, front camera hooked up. working..

having real hard time trying to wire rear cam