Tsp stage 1 tune

Can someone please help me understand the tune I bought from tsp stage 1. I uploaded to ktuner and looks like there a 3 map settings. What do I need to do on the 3 map???

Papayank said:

Did you flash it to your car yet?

Click to expand...

Hi yes I’ve flashed it.. what do I do next!?

Papayank said:

Did you flash it to your car yet?

Click to expand...

There’s a section that has boost per gear that has multiple selections, which ones do I chose..?

Bkejme68 said:

Hi yes I’ve flashed it.. what do I do next!?

Click to expand...

Once you have it flashed, follow the instructions here to switch between maps in the car.

http://www.ktuner.com/KTunerHelp/on_the_fly_map_switching.htm

Map 1 = factory-ish tune, Map 2 = mid-power level, Map 3 = max power level

Bkejme68 said:

There’s a section that has boost per gear that has multiple selections, which ones do I chose..?

Click to expand...

Leave BBG alone, or set it to 15 PSI for 5 and 6 (Not required). Don't touch gears 1-4.

Papayank said:

What's bbg?

Click to expand...

Boost By Gear

hobby-man said:

Once you have it flashed, follow the instructions here to switch between maps in the car.

http://www.ktuner.com/KTunerHelp/on_the_fly_map_switching.htm

Map 1 = factory-ish tune, Map 2 = mid-power level, Map 3 = max power level

Click to expand...

Do I pick between the multiple choices under boost level

Papayank said:

Dont choose anything just flash it to your car....to change tune 1,2,3 ...on your car then hold the cancel button for 4 seconds you'll notice the tachometer moves now go up to choose tune 2 or 3 and then hold cancel again to select the tune....cruise CONTROL must be off

Click to expand...

Hummn I’ve tried several times holing the cancel button and I don’t see any indication on the tack

Papayank said:

Was it successful when you flashed the tune?

Click to expand...

Yes flashed successfully

Papayank said:

I'll make a video and send it to u

Click to expand...

Thank you again for helping

1. Make sure cruise control is off.

2. Hold the cancel button down for a couple seconds.

3. Use set and resume as up and down toggles. You should see the tach move from 1,000 rpm to 2,000 rpm to 3,000 rpm. Each of those numbers represent Map 1, 2 or 3.

4. Once you've decided on a map, press the cancel button again for a couple seconds to choose that tune. You will then see the rpms drop to normal.

This can be done while you're parked or on the move.

Hope that helps.

Bkejme68 said:

Thank you again for helping

Click to expand...

I’ve been working on and off all weekend flashing

Papayank said:

I'll make a video and send it to u

Click to expand...

so looking forward to your video later!!!

Papayank said:

I'll make a video and send it to u

Click to expand...

Bkejme68 said:

Can someone please help me understand the tune I bought from tsp stage 1. I uploaded to ktuner and looks like there a 3 map settings. What do I need to do on the 3 map???

Click to expand...

THIS IS WHAT I DONT GET.. am I supposed to select choices under each heading..????

Bkejme68 said:

THIS IS WHAT I DONT GET.. am I supposed to select choices under each heading..????

Click to expand...

You don't need to change anything on that.

ocbooger said:

You don't need to change anything on that.

Click to expand...

I hold the cancel button and nothing shows on the tack...tsp uploaded successfully to ktuner but I can’t seem to change maps...