WhiskeyTango
Senior Member
- First Name
- Matthew
- Joined
- Jan 29, 2019
- Threads
- 8
- Messages
- 952
- Reaction score
- 1,088
- Location
- Milwaukee
- Vehicle(s)
- 2019 Civic Type R
Stupid photobucket.
Sponsored
I missed the pre-order sales. Is it possible to have similar sales for the 3rd round?Awesome, thanks for the updates everyone! We love seeing these posts.
They had that sale for over a month. Snooze you lose.I missed the pre-order sales. Is it possible to have similar sales for the 3rd round?
What exhaust are you running?Got a video shot and uploaded this morning. Couple WOT pulls. Shows up in 1080p on the youtube app on my phone, only 360 on my work computer for some reason. Anyways, enjoy.
PRL catless DP/FP, factory midpipe back. The 27Won rear motor mount accounts for most of the sound you hear.What exhaust are you running?
Awesome, not many people run this setup. Sounds the best IMO, the intake sounds good too I am looking forward to getting minePRL catless DP/FP, factory midpipe back. The 27Won rear motor mount accounts for most of the sound you hear.
Sounds very good with your exhaustGot a video shot and uploaded this morning. Couple WOT pulls. Shows up in 1080p on the youtube app on my phone, only 360 on my work computer for some reason. Anyways, enjoy.
Just finished installing mine and went out for a night drive. The induction noise and woosh sound is LOUDDDD! A lot louder than the AFE that I had for a week and decided to take it off.
The installation took me 2 hours, mainly because it was hard to get the silicone hose to fit right. The evap flange rubs against the vac pipe, and I couldn't get it not to rub. There's not much wiggle room because silicone hose is thick and thus not as flexible. Also, the silicone hose doesn't go all the way to the turbo inlet pipe, leaving a 2mm gap. The airbox is also rubbing against the bracket that holds the MAF sensor wire to the fuse box. This is not a big deal though but just something I want to point out. Performance wise, I don't notice any increase, but I expected it.
Overall, I'm keeping this intake. Let me know if you guys are having the same issue with the silicone hose.
Did you actually get these two bolts to sit flush? I was so worried that they'd crack the plastic...
Installed mine this morning. I also have a small gap where the silicone meets the inlet pipe. I massaged everything as best as I could and it’s still there. Not a big deal. I plan on installing their titanium inlet pipe once it becomes available and the gap won’t be there anymore. Thanks for the awesome intake PRL! Excited to drive my car later today and see how it sounds/performs.
Yeah, my bolts sit flush. Your box looks like it’s pulled over to the left a little. Maybe try loosening the clamp on your MAF and pull the box over to the right a little.Did you actually get these two bolts to sit flush? I was so worried that they'd crack the plastic...