David16touring
Senior Member
- Joined
- Mar 12, 2017
- Threads
- 6
- Messages
- 83
- Reaction score
- 56
- Location
- Waukegan IL
- Vehicle(s)
- 2016 Civic touring, 2014 Mazda CX-5 Touring FWD.
- Vehicle Showcase
- 1
- Thread starter
- #1
Hey everyone. Just like the title says,I have a P0035 code. I have a 16 civic touring with about 67k miles on it. I’ve been tuned on Ktuner 16.5/21 tune for about 6 months now. I was driving on the highway one day, cruising at about 85-90, and BOOM the light goes on, car can’t hit boost, all the warning lights come on. I pull over to a gas station and I was able to clear the code. Went away for about 2-3 days and it came back on again. I can clear it and the car will drive like normal for that one drive but will come back the next time I either turn the car or just barely get into boost, no specific condition is needed for the code, once it came on when I was barely pulling out of my neighborhood at about 10mph. Other times I can make it a few miles before it comes on. I’ve looked on the forums here(nobody seems to have a clear answer on what their fix was) and have noticed some specific wire harness locations that are prone to breaking, I’ve checked my connections and harnesses, they seem to be okay. At least from what I can see. Anyone have any clue as to what it might be? I’m thinking it’s the boost solenoid that’s bolted to the turbo assembly but cannot find a proper way to test it since it works just fine when I clear the code. Any ideas/suggestions would be greatly appreciated!!!
Mods on the car are PRL catted downpipe, Stage 1 PRL filter and intake, Two step performance Flex fuel kit, Ktuner V2.
Mods on the car are PRL catted downpipe, Stage 1 PRL filter and intake, Two step performance Flex fuel kit, Ktuner V2.
Sponsored