Advice on front lip and side skirts?

I want to get side skirts and a front lip for my car, the 2019 hatchback EX. Any suggestions as to which ones to get? Also, are they difficult to install? I am completely clumsy, and don't know anything about modding cars. The most I've done to my car so far is put vinyl doorsill guards from Jets Vinyl (I managed to rip one of the letters haha), and I took off the dealer sticker (which wasn't hard, but annoying as hell since it wasn't one sticker but a sticker for each individual letter of the dealer name). I also bought a badge overlay from Jets Vinyl in rose gold (the owner, Eric recommended it out of either gold, rose gold, or copper). The next things I want to do are to get some side skirts and a front lip if it isn't too difficult to install haha

The lip for your ex will be a different part to fit your bumper then I'm looking at for my si but I come asking the same question. I ordered a cheaper ebay lip and the fitment isn't 100% on the very outside by fenders. I'm mainly looking at these two options:
https://www.procivic.com/p/ym/2018/civic/pro-design-track-style-front-lip.html
https://baysonr.com/collections/all...da-civic-si-tr-style-front-lip-polyurethane-1

The one from @procivic is the best option unless you want to go a little more aggressive. I have the one from them on my 17 Hatch and it was super easy to install and looks great . Now if you want a little more aggressive go for the Greddy one

-R

SangreRaven said:

The one from @procivic is the best option unless you want to go a little more aggressive. I have the one from them on my 17 Hatch and it was super easy to install and looks great . Now if you want a little more aggressive go for the Greddy one

-R

Click to expand...

Did you install with screws or 3M tape? Or both?

nrchaytor said:

Did you install with screws or 3M tape? Or both?

Click to expand...

screws only which it came with.

-R

SangreRaven said:

screws only which it came with.

-R

Click to expand...

Drilling required?

nrchaytor said:

Drilling required?

Click to expand...

I didn't need to as the lip already had the guide holes on it and the screws were self tapping.

-R

Downforce solution has a great kit

I agree with the statement above. I just installed my front splitter and side skirts from Downforce Solutions yesterday. Took me about 4 hours taking my time with everything.

M0D3RN_ST33L said:

I agree with the statement above. I just installed my front splitter and side skirts from Downforce Solutions yesterday. Took me about 4 hours taking my time with everything.

Click to expand...

I love it

Silverdollar22 said:

Downforce solution has a great kit

Click to expand...

fire as fuck

Downforce solution has a great kit!
Sorry for the double post!!!
Did exhaust upgrade also!