On my website, you get charged right away.Do you get charged for pre.orders right away or only when it ships?
^You’ll be charged immediately.
At this point, it is not getting CARB stickers. Couple reasons I can see this - first, it's expensive. Second, it's pretty easy to uninstall and return to stock for the biennial inspection. I have no idea if this is the 'right' way to do it - meaning, no idea what happens in Cali if you get popped with parts.Asking for the State of CA...
Will it come with the CARB authentication sticker kinda like Mishimoto?
Yeah what’s up with that @PRL Motorsports I want to be able to do another custom tune when you guys release the inlet pipe also.I didn't see a race MAF option available. Will all launch units be Street MAF only?
There will be no Race Specific MAF for a race version, if we do finalize our "race version" it will be adaptable as an add on to the MAF housing. Meaning you will need this whole High Volume intake system in order to add the theoretical "race version".Not gonna make the same mistake that I made with my PRL Cobra Intake for the SI. The MAF itself costs around $150 - if there’s going to be a race MAF, I’ll wait for it before buying.
Thanks, that clears things up. Pre-order time!There will be no Race Specific MAF for a race version, if we do finalize our "race version" it will be adaptable as an add on to the MAF housing. Meaning you will need this whole High Volume intake system in order to add the theoretical "race version".
We used an oiled filter elementWas it specified if the filter is oil or dry?
Ordered!!We're excited about this as well! At this time we have no plans to offer a carbon air box.
We are a fan of our rotomolded air box design for the fact that it that heatsoaks much less in comparison to a metal air box, it flows well, looks sleek and is cost effective. This box allowed us to retain the factory ducting seal. Also, our billet MAF housing was designed to offer the smoothest fuel trims on the market, while also utilizing a giant 6" cone filter for maximum airflow.
Thanks, guys!
The factory wire casing is removed and then wrapped with the loom provided with our kit, similar to Mishi's install.
Psst, hey guys. The Pre-Order is now live with an ETA of 8/1/19!
https://prlmotorsports.com/2017CivicType-rfk8.aspx
Exactly what I'm planning to do. White vinyl decals. PRL I'm sure yall could make some quick bucks selling that lolCan’t wait! Sign me up for the pre order! Looks a lot better. Only thing I think would look nice is if the PRL logo on top was white. I might try to cut a custom decal for it, just that extra lil pop. Also the logo engraved on the maf housing. If it was done after anodizing it would have that extra pop.