Adjusting Torque Values Hondata

JRoye

Member
First Name
Johnny
Joined
Aug 24, 2018
Threads
5
Messages
21
Reaction score
9
Location
Odenton, Maryland
Vehicle(s)
2018 Civic type R, 1997 Civic Ex
Country flag
Good morning everyone!

I looking for some help on how to adjust the torque values by gear in hondata. I know how to pull up each gear but there is a ton of charts per gear.

Right now I am running improved throttle with full power, 1st and 2nd with full bolt ons and flex fuel. I went out last night and did a pull from 2nd and got no VSS light and it felt like it hooked well. I have the traction control set to 4%. I was thinking of lowering that back to 3% and trying a launch from first.

Another question, what is everyone’s preferred launch setting?
Also if I am not getting the VSS light and no spin, would I need to worry about adjusting the torque to be lower?

I am seeing most people are keeping the same torque for gears 2-6, but lowering 1st. Thanks for the help!
Sponsored

 

boosted180sx

Senior Member
Joined
Mar 27, 2017
Threads
25
Messages
5,038
Reaction score
5,087
Location
torrance, ca
Vehicle(s)
2017 CTR, 2016 ILX
Country flag
There are 18 tables technically. 6 tables (one for each gear) per driving mode.
1st - 6th gear table : Comfort mode
1st - 6th gear table : Sport mode
1st - 6th gear table : +R mode

the x axis is throttle pedal %, and the y axis is rpm. You just adjust the values in the cells where the pedal % and rpm matches.

"felt" is not a good indication. it "felt" good, it "feels" like it's running good is not a good way to determine anything. You HAVE to datalog it in order to make sure. You do a datalog, review it, and see if the throttle plate is closing during your run and look at wheels speeds front to rear.

I have lowered 1st gear torque but there really isn't a time when i floor first gear. I don't do any drag racing so doesn't matter to me.
 
OP
OP
JRoye

JRoye

Member
First Name
Johnny
Joined
Aug 24, 2018
Threads
5
Messages
21
Reaction score
9
Location
Odenton, Maryland
Vehicle(s)
2018 Civic type R, 1997 Civic Ex
Country flag
There are 18 tables technically. 6 tables (one for each gear) per driving mode.
1st - 6th gear table : Comfort mode
1st - 6th gear table : Sport mode
1st - 6th gear table : +R mode

the x axis is throttle pedal %, and the y axis is rpm. You just adjust the values in the cells where the pedal % and rpm matches.

"felt" is not a good indication. it "felt" good, it "feels" like it's running good is not a good way to determine anything. You HAVE to datalog it in order to make sure. You do a datalog, review it, and see if the throttle plate is closing during your run and look at wheels speeds front to rear.

I have lowered 1st gear torque but there really isn't a time when i floor first gear. I don't do any drag racing so doesn't matter to me.
Ok great. Yeah I will run a datalog on it to make sure. I only had time for a quick pull to see if it was a difference. I appreciate the help!
Sponsored

 


 


Top