KTuner V2 LED setup sheet (google sheet)

Hello everyone,

I created this spread sheet to simplify my LED setups. If you would like to use it also, select file > make a copy. This will place a copy in your google drive.


Duplicate master sheet & rename
Set your trigger (ect, iat, vss, RPM, map, etc) from the drop down.
Set warning type from the drop down.
Select custom color in KTuner software to record R,G,B values
Adjust and record limit settings


I have included my current LED setup on sheet 2. It operates as follows:
LED 1: When ECT is below 149; LED blinks blue. 150-220 is a sweep from a dim green to a slightly brighter orange.
LED 2-3-4: Sweeping shift light. All LED's start green and sweep to orange-red before reaching warning level with an intense red blink. This still needs some work on limits.
LED 5: Gives a vague idea of IAT. Could definitely use some more work on range & color.

Sheet: https://docs.google.com/spreadsheets/d/1dmktnuaGPfTHqjKPQyl6u75TpWV4J6Yp-4qQLNCHFVk/edit?usp=sharing

Gif of my setup: https://imgur.com/a/MsMBaDg


Hope you enjoy,
Crab

Pretty sure you emailed about this the other day. Awesome!

Hey Crab,

Thanks, just copied your LED layout to my Ktuner LED set up for my Aegean Blue Si Sedan Nice work! Thanks!

Stratman49 said:

Hey Crab,

Thanks, just copied your LED layout to my Ktuner LED set up for my Aegean Blue Si Sedan Nice work! Thanks!

Click to expand...

Glad you liked it

It would be cool to get a bunch of interesting setups linked here.

Here is the shift light/RPM warning I set up. Just got my Ktuner V2 yesterday
I can post details if anybody wants to copy

https://imgur.com/a/SFoRUgj

Here's my setup:
https://imgur.com/a/JfN97VR

Settings:

• Type: RPM
• Warning Type: Above Threshold

All LEDs:

• Warning Value: 7000 | Intensity: 70 | Color: Red (RGB 255,0,0)
• Cutoff Value: 0

LED 1:

• Starting Value: 2500 | Intensity: 0 | Color: Blue (RGB 0,126,255)
• Ending Value : 3499 | Intensity: 40 | Color: Blue (RGB 0,126,255)

LED 2:

• Starting Value: 3500 | Intensity: 0 | Color: Green (RGB 0,255,0)
• Ending Value : 4499 | Intensity: 40 | Color: Green (RGB 0,255,0)

LED 3:

• Starting Value: 4500 | Intensity: 0 | Color: Yellow (RGB 255,255,0)
• Ending Value : 5499 | Intensity: 40 | Color: Yellow (RGB 255,255,0)

LED 4:

• Starting Value: 5500 | Intensity: 0 | Color: Orange (RGB 255,126,0)
• Ending Value : 6499 | Intensity: 40 | Color: Orange (RGB 255,126,0)

LED 5:

• Starting Value: 6500 | Intensity: 0 | Color: Red (RGB 255,0,0)
• Ending Value: 7000 | Intensity: 40 | Color: Red (RGB 255,0,0)

For those who use the K Tuner V2 unit while driving, (I ordered a mount for it) what is your favorite layout and what kind of data do you choose to display? Thanks!

@knadsady I see you figured it out on your own

mfwalsh942 said:

For those who use the K Tuner V2 unit while driving, (I ordered a mount for it) what is your favorite layout and what kind of data do you choose to display? Thanks!

Click to expand...

I use the 11 item gauge with the tach/gear readout in the center. Most information possible. Use IAT1/2, ECT1/2, MAP, KCON, AFR, TPS, TPC, STFT, LTFT.

hobby-man said:

@knadsady I see you figured it out on your own

I use the 11 item gauge with the tach/gear readout in the center. Most information possible. Use IAT1/2, ECT1/2, MAP, KCON, AFR, TPS, TPC, STFT, LTFT.

Click to expand...

I did, sort of. I set up with the same layout, my readouts are very slightly different, but now that I know how to manipulate them, I can play with it a little until I get it just the way I like it. Thanks!

@knadsady I took your LED setup and tweaked it a bit to take into account the fuel cutoff when you hit redline at 6500. You get an early warning at 6300 RPM and a slight shift in the colors.

All, I made one template with a Green, yellow, orange, and red swipe shown below and one that is all red but same functionality. Attached is a .zip file with the two templates or you can grab them from my OneDrive. : https://1drv.ms/u/s!BN5M1NMzYHJVg-sl_EFlHIv_1rywsA?e=TcdYsC


Settings:

• Type: RPM
• Warning Type: Above Threshold

All LEDs:

• Warning Value: 6300 | Intensity: 70 | Color: Red (RGB 255,0,0)
• Cutoff Value: 0

LED 1:

• Starting Value: 2000 | Intensity: 0 | Color: Green (RGB 0,255,0)
• Ending Value : 2999 | Intensity: 40 | Color: Green (RGB 0,255,0)

LED 2:

• Starting Value: 3000 | Intensity: 0 | Color: Yellow (RGB 255,255,0)
• Ending Value : 3999 | Intensity: 40 | Color: Yellow (RGB 255,255,0)

LED 3:

• Starting Value: 4000 | Intensity: 0 | Color: Orange (RGB 255,126,0)
• Ending Value : 4999 | Intensity: 40 | Color: Orange (RGB 255,126,0)

LED 4:

• Starting Value: 5000 | Intensity: 0 | Color: Redish-Orange (RGB 255,63,0)
• Ending Value : 5999 | Intensity: 40 | Color: Redish-Orange (RGB 255,63,0)

LED 5:

• Starting Value: 6000 | Intensity: 0 | Color: Red (RGB 255,0,0)
• Ending Value: 6299 | Intensity: 40 | Color: Red (RGB 255,0,0)
  

hobby-man said:

Here is the shift light/RPM warning I set up. Just got my Ktuner V2 yesterday
I can post details if anybody wants to copy

Click to expand...

Please post details, yours looks great!