***MAPerformance Civic SI 1.5t Catback Release and Group Buy!***

Thanks_Enjoi said:

man mine doesn't sit that flush. I wish it did, mine is super low

Click to expand...

This is the result of messing with it forever. Initially, it hung super low too.

Vincentbrown65 said:

This is the result of messing with it forever. Initially, it hung super low too.

Click to expand...

ive heard this a few times but our exhaust hangs as low if not higher that the stock exhaust

MAPerformance said:

ive heard this a few times but our exhaust hangs as low if not higher that the stock exhaust

Click to expand...

Yes its all based on adjustment. If you keep everything loose enough to be manipulated it can tuck extremely tight. So tight it could rattle against the chassis. People are not properly adjusting the piping to tuck correctly. A lot has to do with the resonator piping the angle you place that at will determine how tight the exhaust fits. If you have that pipe tightened down at the wrong angle it will throw everything off. People need to leave that front v-band loose. I have installed multiple MAP exhausts on the new SI models and that is what I have found.

MAPerformance said:

ive heard this a few times but our exhaust hangs as low if not higher that the stock exhaust

Click to expand...

Man mine must be wrong. Its super low

I would love to get this exhaust, but no center exit on my civic exhaust. Maybe make an option for y pipe dual exit with turn downs a possibility? I know it sounds far-fetched since the center exhaust exit is the most popular on this generation civic and the type of exhaust I have on mine isn't as comming. Thought I'd at least share my feedback.

Vincentbrown65 said:

This is the result of messing with it forever. Initially, it hung super low too.

Click to expand...

I really wish this exhaust system just used 3 bolt flanges. That would take all of the guess work out of it. I particularly hate the slip joint clamp on this system. I just want to be able to hang it, bolt it together and have a factory like appearance and fit.

dodgeswinger73 said:

I really wish this exhaust system just used 3 bolt flanges. That would take all of the guess work out of it. I particularly hate the slip joint clamp on this system. I just want to be able to hang it, bolt it together and have a factory like appearance and fit.

Click to expand...

Slip joint clamp was a lazy and quite stupid choice, not going to lie. I tightened mine then tack welded it so hopefully that piece of crap will stay put.

Question for all the members that currently have Map exhaust.

I am in the market for a rear diffuser. Does anyone have one yet?

Bmspec, Aeroflow all said our exhaust is to wide. Hopefully someone else has had better luck then me!

This is solid feedback. It's a super good perspective to have... we HAD to use slip clamps on some of our systems with dual exits where customers needed a bit of wiggle room to get their systems completely lined up to their satisfaction. I will farm this back to the team. Thanks for the heads up

dodgeswinger73 said:

I really wish this exhaust system just used 3 bolt flanges. That would take all of the guess work out of it. I particularly hate the slip joint clamp on this system. I just want to be able to hang it, bolt it together and have a factory like appearance and fit.

Click to expand...

givemeadollar said:

Slip joint clamp was a lazy and quite stupid choice, not going to lie. I tightened mine then tack welded it so hopefully that piece of crap will stay put.

Click to expand...

N0TYPR said:

Question for all the members that currently have Map exhaust.

I am in the market for a rear diffuser. Does anyone have one yet?

Bmspec, Aeroflow all said our exhaust is to wide. Hopefully someone else has had better luck then me!

Click to expand...

Where did you get that duck bill ?

MAPerformance said:

This is solid feedback. It's a super good perspective to have... we HAD to use slip clamps on some of our systems with dual exits where customers needed a bit of wiggle room to get their systems completely lined up to their satisfaction. I will farm this back to the team. Thanks for the heads up

Click to expand...

Hey MAPerfance could i get a link to the coupe civic si maperfance race exhaust because i can’t seem to find it ?

CivicSiNJ said:

Hey MAPerfance could i get a link to the coupe civic si maperfance race exhaust because i can’t seem to find it ?

Click to expand...

Anytime, send us a PM and we will take care of you
The drop downs allow you to select your rear muffler section .
https://www.maperformance.com/products/map-catback-exhaust-2017-honda-civic-si-coupe-hdax-cbe-cpe

LEO @ MAP

MAPerformance said:

Anytime, send us a PM and we will take care of you
The drop downs allow you to select your rear muffler section .
https://www.maperformance.com/products/map-catback-exhaust-2017-honda-civic-si-coupe-hdax-cbe-cpe

LEO @ MAP

Click to expand...

what’s your email or how do i PM i’m new to this page sorry i’m aboht to buy the product

CivicSiNJ said:

Where did you get that duck bill ?

Click to expand...

Hey, it’s by a company called BMSPEC

If anyone needs anything feel free to reach out to me and i will gladly help you