richy_rich619
Member
- Joined
- Jul 12, 2018
- Threads
- 2
- Messages
- 37
- Reaction score
- 8
- Location
- San Diego
- Vehicle(s)
- 2015 BMW 335i
Well 265/35 on stock ride height rub?
Sponsored
Well 265/35 on stock ride height rub?
Learn2turn
Senior Member
- First Name
- Christopher
- Joined
- Nov 26, 2018
- Threads
- 16
- Messages
- 714
- Reaction score
- 371
- Location
- Rio Rancho NM
- Vehicle(s)
- '79 Toyota Longbed PU, '95 (Drift Toy) Miata, '05 Tuned Gran Prix White S2000, '19 Championship White C-Type R
How much $$$ were/are they?
Learn2turn
Senior Member
- First Name
- Christopher
- Joined
- Nov 26, 2018
- Threads
- 16
- Messages
- 714
- Reaction score
- 371
- Location
- Rio Rancho NM
- Vehicle(s)
- '79 Toyota Longbed PU, '95 (Drift Toy) Miata, '05 Tuned Gran Prix White S2000, '19 Championship White C-Type R
Please tell me where so I can get some! Thank you
- Banned
- #34
I am not OP but I asked the same question. Yes, it will rub. You need camber adjustment. Some people claim that the rubbing isn't bad, but I wanted zero rub so I did not get these wheels.
Ouhei
Senior Member
- First Name
- Alex
- Joined
- Nov 1, 2018
- Threads
- 8
- Messages
- 459
- Reaction score
- 464
- Location
- Raleigh, NC
- Vehicle(s)
- 2019 CW CTR
There’s no reason it would rub at stock height. Will probably rub lightly if you’re lowered, run a skinnier 265 (like a firehawk 500) or go 255 to be extra safe.
- Banned
- #36
I'm just passing on what I was told by the OP.
apexit53
Senior Member
- First Name
- Mike
- Joined
- Dec 19, 2018
- Threads
- 24
- Messages
- 364
- Reaction score
- 219
- Location
- Madison WI
- Vehicle(s)
- 23 CTR, 23 Integra aspec MT
Where is the best place to get these wheels? Might look at these or the freeform wheel
apexit53
Senior Member
- First Name
- Mike
- Joined
- Dec 19, 2018
- Threads
- 24
- Messages
- 364
- Reaction score
- 219
- Location
- Madison WI
- Vehicle(s)
- 23 CTR, 23 Integra aspec MT
I just ordered a set for freeform konigs in their radiant bronze! They are on back order with a release date of late march! Fine for me since IT WONT STOP SNOWING here
bobafettm
Senior Member
- Joined
- Jan 8, 2017
- Threads
- 12
- Messages
- 733
- Reaction score
- 844
- Location
- Metro Detroit, MI
- Vehicle(s)
- 2006 Lotus Exige; 2018 & 2021 Honda Type R
Anyone tried these at stock ride height and running 265/35ZR-18 MICHELIN PILOT SPORT 4S?
I know my current setup works great with Motegi 18x9.5 265/35 PS4S don’t see why it wouldn’t be identical.
I know my current setup works great with Motegi 18x9.5 265/35 PS4S don’t see why it wouldn’t be identical.
bobafettm
Senior Member
- Joined
- Jan 8, 2017
- Threads
- 12
- Messages
- 733
- Reaction score
- 844
- Location
- Metro Detroit, MI
- Vehicle(s)
- 2006 Lotus Exige; 2018 & 2021 Honda Type R
https://www.fitmentindustries.com/w...2018-honda-civic-cosmis-racing-r1-stock-stock
I did confirm with TireRack that the PS4S 265/35 and the Kumho Ecsta 265/35 have the exact height. There should be no reason why the identical setup Cosmis Racing R1 18x9.5 +35 and Konig Ampliform 18x9.5 +35 shouldn't work the same for stock ride height.
I did confirm with TireRack that the PS4S 265/35 and the Kumho Ecsta 265/35 have the exact height. There should be no reason why the identical setup Cosmis Racing R1 18x9.5 +35 and Konig Ampliform 18x9.5 +35 shouldn't work the same for stock ride height.
Sales@USR
Senior Member
- First Name
- USR
- Joined
- Dec 20, 2018
- Threads
- 3
- Messages
- 134
- Reaction score
- 329
- Location
- Cumming, GA
- Website
- www.unitedspeedracing.com
- Vehicle(s)
- 2017 Honda Civic Type R
- Vehicle Showcase
- 1
what is the offset of your Motegi? most I have seen are +45 I believe. +45 265 will fit all around on stock height without problem, or even on swift springs. 265 on +35 will not fit in rear without rubbing if cornering hard and front will be very tight as well....best to add camber to be sure no rubbing.
bobafettm
Senior Member
- Joined
- Jan 8, 2017
- Threads
- 12
- Messages
- 733
- Reaction score
- 844
- Location
- Metro Detroit, MI
- Vehicle(s)
- 2006 Lotus Exige; 2018 & 2021 Honda Type R
+45 for the Motegi. I’ve spoken to two members with +35 and stock height which they confirmed no rubbing but neither did track duty. Not sure how hard they have pushed. Would be safe to add some camber to confirm that the wheel doesn’t get rubbed with weight in it or hard cornering
apexit53
Senior Member
- First Name
- Mike
- Joined
- Dec 19, 2018
- Threads
- 24
- Messages
- 364
- Reaction score
- 219
- Location
- Madison WI
- Vehicle(s)
- 23 CTR, 23 Integra aspec MT
When i get my freeforms ill be on stock ride-height. I plan on doing a track day at road america on them! Ill keep everyone posted for rubbing issues. I think I am going to run 255 tires though!
richy_rich619
Member
- Joined
- Jul 12, 2018
- Threads
- 2
- Messages
- 37
- Reaction score
- 8
- Location
- San Diego
- Vehicle(s)
- 2015 BMW 335i
Any pics of your new setup?
apexit53
Senior Member
- First Name
- Mike
- Joined
- Dec 19, 2018
- Threads
- 24
- Messages
- 364
- Reaction score
- 219
- Location
- Madison WI
- Vehicle(s)
- 23 CTR, 23 Integra aspec MT
I dont have them yet. They are on back order, ETA late march!
im ok with it since its in the single digits here right now lol
Sponsored
Last edited:
