Si SPEC Inc. Proprietary Stage 2+ Clutch/Aluminum SMF + More!

BoostedDreams said:

I’ll try it when I leave the gym and let ya know

Click to expand...

For sure! I'm thinking it's just the trade off with having an aluminum flywheel. Get us clips of the revs too! I'm curious to see the difference in revs between the aluminum and steel flywheel.

As for my shudder and drivetrain noise, I'll try and get more clips outside the car and some driving clips to show the shudder I am talking about.

IvanJonn said:

For sure! I'm thinking it's just the trade off with having an aluminum flywheel. Get us clips of the revs too! I'm curious to see the difference in revs between the aluminum and steel flywheel.

As for my shudder and drivetrain noise, I'll try and get more clips outside the car and some driving clips to show the shudder I am talking about.

Click to expand...

Alright so I was able to let out the clutch in 1st without throttle with minimal shutter.
Also I’m having no trouble with my break hold feature

BoostedDreams said:

Alright so I was able to let out the clutch in 1st without throttle with minimal shutter.
Also I’m having no trouble with my break hold feature

Click to expand...

Howmuch adjustments did you make to the pedal

the_j00j said:

Howmuch adjustments did you make to the pedal

Click to expand...

I didn’t do any. Picked it up from shop ready to go

BoostedDreams said:

Alright so I was able to let out the clutch in 1st without throttle with minimal shutter.
Also I’m having no trouble with my break hold feature

Click to expand...

If, as the clutch seats in, it starts to grab at low throttle settings, please update this thread.

D-RobIMW said:

It sounds like the disc is backwards

Click to expand...

Winner!

Might do my steel flywheel/clutch in a week or two depending how long my stock clutch will hold up with stge 2 .

the_j00j said:

Might do my steel flywheel/clutch in a week or two depending how long my stock clutch will hold up with stge 2 .

Click to expand...

If you roll onto the throttle from 3rd gear or higher mine would absolutely slip. 1st -2nd was okay because tires would break loose and alleviate the slipping clutch. You’re not going to be able to fully enjoy their stage 2 tune on the stock clutch.

@IvanJonn how is the driving experiece thus far?

“So! Itinerary today:

Work, pick up clutch, pick up new slave cylinder (I'm going to be running the clutch delay valve again), pick up other parts at home, and then drop everything off to my friend tonight He will start taking the car apart tonight and is going to try to take some pictures for me of the process. Hoping to get it back by the end of this week! Super excited!”


Why are you running clutch delay valve again on new setup?? I just ordered a used slaved cylinder with the cdv valve already deleted. Fill me in!

airickmatthews said:

hoping my install goes smooth on Monday

Click to expand...

Get it installed yet?

Ruskee said:

Get it installed yet?

Click to expand...

Nope. Shop kept dicking me around. Found another place but was told Friday. Seems most places around me won’t do aftermarket clutches

Damn that sucks. Hope you get it installed soon

I'm gonna go ahead and order the Stage 2 with steel flywheel.