civicdota
Senior Member
- Joined
- Jun 14, 2017
- Threads
- 0
- Messages
- 98
- Reaction score
- 22
- Location
- Toronto, ON
- Vehicle(s)
- 2017 EX-T Sedan
I recall the emergency jack doesn't actually lift at the pinch weld but rather the frame to the inner side of it. The weld was only used for alignment. That said the weld itself could very likely be strong enough. I do know that other Japanese cars get their pinch welds bent by lifts/stands.That it is and is specified in the manual that this is what you should do. If it is good enough for the crappy scissor jack, then it is plenty fine for a jack stand, floor jack or lift on a two post with pads.
Sponsored