Question about projector retrofitting

Hi everyone, sorry if this is a dumb question but I haven't done any kind of project like this yet. So I've been wanting to retrofit LED projectors for a while (I'm thinking of buying a pair of headlight assemblies off eBay so that I don't screw up my original pair). Will something like the Morimoto M-LED or Osram bi-LED, which I believe are 3", fit?

Retro quick H1 7.0 is direct fit with the provided bracket, anything else will need trimming. You need to cut stock shroud and make mouting bracket.

yamin1021 said:

Retro quick H1 7.0 is direct fit with the provided bracket, anything else will need trimming. You need to cut stock shroud and make mouting bracket.

Click to expand...

This is what I’ll most likely be doing as well. The Retrofit Source has these projectors and there’s a video on YouTube of someone installing them into a 10th gen civic. Probably one of the easiest retrofits out there and the output is 100x better than stock.

I wonder if the quick retro would be an easy diy i have never retrofitted any projectors before but have opend up retrofitted headlight housings for cleaning, Is re aiming reqiured for the quick retro?