Replacing Front License Plates

Got a HB Sport—would like to move the front plates closer to fog lights—
HAS anyone done this????
Pics please

I used the grill on the passenger side fog light area to fab up a custom mount using the factory license plate mount. 2 bolts, 4 washers, 4 rubber grommets and 10 nuts. I'll share pics when I can take a couple. It was easy to put on and it only needed to be tightened once because I didn't use nylon locknuts. Didn't want to block the intercooler grill airflow or I would have kept it there. It gets lit up by the fog light but doesn't block it at all from the front.

Look forward to seeing

Hope these are clear, this is a top view of the bolts then a corner view

Thanks. If possible also from the front. And u said that u used the oem bracket too?

Yeah used the oem bracket and then bored out the mounting holes to fit the bolt

Sweeeet

This shows where the bolts come through on my mount, I could have done 3 but two seem to be holding it fine.

SDSport6MT said:

This shows where the bolts come through on my mount, I could have done 3 but two seem to be holding it fine.

Click to expand...

Question: is it ok to cover up that open air duct?

Bmorecivic said:

Question: is it ok to cover up that open air duct?

Click to expand...

It is a sound path for the horn so no issues with covering it from an airflow perspective.

Alright thanks. At least it’ll cover up the terrible sound the Civic Horn makes....Yuck