Jet Hot Coating

nemesis249mp · Aug 22, 2018

Has anyone used them and if so how far back did you coat?

Any thoughts on coating all the way to the mufflers

Almostfast · Aug 22, 2018

I had jet hot do the headers on my LS1 s10, and they looked like $#!+ After a year... All rusty and pitted. Not a fan

the8rotor · Aug 22, 2018

I have my kooks headers coated on my gto and couldn't be happier. Been coated for 8 years and still look great.

CincyTypeR · Aug 23, 2018

Never done Jet Hot coating but would say doing it to the mufflers would be a waste of money. Main focus is to keep down heat in the engine bay. So I would only do the downpipe and frontpipe.

iLovePho · Aug 23, 2018

I only coated the DP and FP. I just had it installed last weekend, so can't comment on durability just yet, but they do look great. Our cars need all the cooling measures it can get.

Honda Civic 10th gen Jet Hot Coating PRL.JPG

Hayabusa160 · Aug 23, 2018

once you past the front pipe its not as effective the exhaust will be cooled down by then. but keeping the heat inside the pipes will keep the exhaust velocity up.
i had kooks headers also and after 9 years they still looked new.
if the pipes are mild steel the coating will flake off after a year or so because the pipes starts to rust.

the8rotor · Aug 23, 2018

Hayabusa160 said:
once you past the front pipe its not as effective the exhaust will be cooled down by then. but keeping the heat inside the pipes will keep the exhaust velocity up.
i had kooks headers also and after 9 years they still looked new.
if the pipes are mild steel the coating will flake off after a year or so because the pipes starts to rust.

Great point on the mild vs stainless.

Jet Hot Coating

nemesis249mp

Senior Member

Almostfast

Senior Member

the8rotor

CincyTypeR

Senior Member

iLovePho

Senior Member

Hayabusa160

The Master

the8rotor

Similar threads