Great deal on an Ultra Racing strut bar

got mine today. installed it as well. It was quite a snug fit and had to re tighten the bolts on one side of the strut tower to make it evenly-fit. overall, a great product. I noticed a great difference when driving through traffic circles near my house.

Aegean303 said:

I just got mine from eBay, make sure to check it when you get it. Mine was bent...

Click to expand...

I believe it is slightly bent because the 2 strut mounts are slightly bent inwards and not level with the ground

Mine was the same way and fit fine.

gtman said:

Mine was the same way and fit fine.

Click to expand...

I might try again later today and see if I can force it in lol cause one side wouldn’t go in when I tried lol

Aegean303 said:

I might try again later today and see if I can force it in lol cause one side wouldn’t go in when I tried lol

Click to expand...

I will be very tight by design.

gtman said:

I will be very tight by design.

Click to expand...

That's what she said

gtman said:

I will be very tight by design.

Click to expand...

So this is the end result , i finally got both sides in the bolts, but I don’t think it’s suppose to look like that for the top one but correct me if I’m wrong. Also, does the hose lean against the bar? (Last picture)

i went through the UR website, and they are charging $35 for shipping, im not about that life lol

i just placed my order through ebay for the 160.00 one free shipping NO TAX!!

should be here by Aug 1. ill report back once i get it.

Aegean303 said:

So this is the end result , i finally got both sides in the bolts, but I don’t think it’s suppose to look like that for the top one but correct me if I’m wrong. Also, does the hose lean against the bar? (Last picture)

Click to expand...

You need to pull the 4th pin in the strut tower. That will give you extra camber and will expose more threads.

https://www.civicx.com/threads/how-to-adjust-front-camber-on-a-tenth-gen-civic.15715/

I’d recommend reusing the OEM hardware too since the washers that come with it will deform after some use.

Yea one of the hose on the passenger side does touch the bar. I'm gonna try wrapping some insulating material where the 2 pieces meet

gtman said:

Trust me you won't have time to drink much beer. It's a 10 minute install.

Last one left but only $160 with free shipping:
https://www.ebay.com/itm/UR-Vehicle...3?hash=item3b0ee29c2b:g:6qgAAOSw-0RbC5E6#rwid

Click to expand...

LOL, it keeps saying "last one" after someone buys one. A few days ago I checked and it said "3 sold" and "last one." Today I check and it says "4 sold" and "last one." I was going to buy it when Ebay had the 15% off code. Maybe the next 15% off code I will buy it. Just to confirm, does this really fit the 2017 hatchback???

bunbao said:

LOL, it keeps saying "last one" after someone buys one. A few days ago I checked and it said "3 sold" and "last one." Today I check and it says "4 sold" and "last one." I was going to buy it when Ebay had the 15% off code. Maybe the next 15% off code I will buy it. Just to confirm, does this really fit the 2017 hatchback???

Click to expand...

Lord I hope it fits with no issues. I been having a headache with installation. Even after having professionals install my fogs I had to figure out how to aim the damn thing. Strut bar and wheel spacers will hopefully be my last mod to the car. I just want things to be finish so I can enjoy the car without thinking about what else I am going to do to it.

bunbao said:

LOL, it keeps saying "last one" after someone buys one. A few days ago I checked and it said "3 sold" and "last one." Today I check and it says "4 sold" and "last one." I was going to buy it when Ebay had the 15% off code. Maybe the next 15% off code I will buy it. Just to confirm, does this really fit the 2017 hatchback???

Click to expand...

i was the 4th buyer ..lol..i bought it on 07/12 still hasnt shipped, i hope its not bent of anything

DarkLight said:

You need to pull the 4th pin in the strut tower. That will give you extra camber and will expose more threads.

https://www.civicx.com/threads/how-to-adjust-front-camber-on-a-tenth-gen-civic.15715/

I’d recommend reusing the OEM hardware too since the washers that come with it will deform after some use.

Click to expand...

I didn’t pull the 4th pin but I used a hammer and got it in there lol... I removed the washer and you are correct, they already started to deform after 2days

Hey @gtman , just wanted to know does your ultra racing sticker come off? ( the silver one)