Works Bell SRD kit

[flipnrr]

I’m in the middle of installing my setup including 226 hub, srd kit, works bell tilt and steering wheel. I am having trouble connecting the srd kit to the 226.

the hub is 2 peice and you need to take off the other half

Sponsored

 

[Fk7Peyton]

the hub is 2 peice and you need to take off the other half

I’m assuming the hub comes assembled together because it seems to be one piece.

 

[flipnrr]

I’m assuming the hub comes assembled together because it seems to be one piece.

yes, its held up by screws once you take it off you just use the bottom part of the mount

 

[Fk7Peyton]

Just finished

 

[typearghhhh]

Just finished

pics?

 

[Fk7Peyton]

pics?

 

[typearghhhh]

your horn works too? i cant wait to order my setup

 

[Fk7Peyton]

your horn works too? i cant wait to order my setup

My horn doesn’t work currently because I didn’t plug in all the grounds.

 

[alpinefd]

hi guys, can you confirm just one resistor from the works bell hub kit will prevent the airbag light?
which pin do you plug them into?

 

[Z06Chris]

hi guys, can you confirm just one resistor from the works bell hub kit will prevent the airbag light?
which pin do you plug them into?

I believe these kits come with 1 resistor because the jdm cars only need 1. You'll need to buy another for USDM cars. I had to buy another to remove my srs light.

 

[abethagod]

I’m just curious because I’m about to buy it myself but I wanted to know how much you got charged extra after they delivered? If you got charged anything.

 

[Eugene_Fk8]

Anyone has the issue that air bag resistor doesn't worked? I tried 3 pairs by now and start thinking probably the original airbag connectors was broken so getting a new clock spring to try.

Just to check, the Work bell supplied resistors are the 2 wire kit with 1 A fuse right (equals to 2.2 ohm resistance) ?

 

[alpinefd]

have you guys gotten the horn button to work using works bell hub? how do you do it?

 

[alpinefd]

What is the exact difference between the B1 and B1S SRD? I"m using a 226 regular hub with a quick release (because i needed the steering wheel closer to me). So i'm wondering which SRD switch kit i should get

 

[CAPTS]

is there any install guide on this ? abt to install mine soon. i have the wb stuffs. yes if i recall correctly it only came with 1 resistor.

Sponsored