Works Bell SRD kit

[typertimo]

are you getting any srs/airbag lights coming on?
the 226s only comes with one set of resistors, which one do you plug it into?

I didn’t get any lights with mine . Yeah it only comes with one resistor. But I had one laying around that I used so I plugged both of them.
Maybe someone else can chime in about the one resistir provided and where to plug it In.

Sponsored

 

[hesitation]

I didn’t get any lights with mine . Yeah it only comes with one resistor. But I had one laying around that I used so I plugged both of them.
Maybe someone else can chime in about the one resistir provided and where to plug it In.

where can you buy another resistor from?

 

[typertimo]

where can you buy another resistor from?

If no one else with the kit can chime in and confirm only one is needed. You can def get it on eBay !

 

[hesitation]

well i finally got around to installing my setup -- it still needs an alignment since the wheel is off like 1-2 degrees but otherwise there aren't any issues.

 

[Nick6]

Any idea if this works for the si as well? or type r specific?

 

[typertimo]

Any idea if this works for the si as well? or type r specific?

It works on all 10th gen... I believe

 

[hesitation]

Any idea if this works for the si as well? or type r specific?

the SRD kit will work as long as your steering wheel controls are the rounded (left) and not the sharp (right) ones

 

[alpinefd]

with the b1s and works quick release, how is the steering wheel distance to the driver compare to stock steering wheel?

if I need to move the steering wheel closer to the driver, i wonder if it's better to order the B1 + the quick release, will that work as well?

 

[hesitation]

you need to order the 226 boss along with the SRD kit. if you plan on running a quick release, you will need to get the S (short) version of both the 226 boss and the SRD

the steering wheel stock becomes significantly further away than normal

 

[jdm_mike]

with the b1s and works quick release, how is the steering wheel distance to the driver compare to stock steering wheel?

if I need to move the steering wheel closer to the driver, i wonder if it's better to order the B1 + the quick release, will that work as well?

226 boss short, srd short, any quick release, any steering wheel

I'm running nrg quick and mugen steering

 

[alpinefd]

226 boss short, srd short, any quick release, any steering wheel

I'm running nrg quick and mugen steering

with this combo
226 boss short, srd short, any quick release, any steering wheel

how is the steering wheel distance, is it same as the stock steering wheel?
or closer to the driver

 

[alpinefd]

also are you guys able to get the horn to work with this combo?

 

[hesitation]

yes, the horn works as long as connect the grounds.

the stock is much further away than stock, my hands can barely reach it now

 

[jdm_mike]

how is the steering wheel distance, is it same as the stock steering wheel?
or closer to the driver

also are you guys able to get the horn to work with this combo?

My reach is farther than stock

I just did a horn delete, but yes you just have to wire them

 

[Fk7Peyton]

I’m in the middle of installing my setup including 226 hub, srd kit, works bell tilt and steering wheel. I am having trouble connecting the srd kit to the 226.

Sponsored