Wheels

[2jzjosh]

Hey guys Im really new to cars and stuff and wanted to know what this meant on my wheels I might buy. The picture says 5x100/5x114.3 . I have a 2018 honda civic sedan 2.0i and wanted to see if they’ll fit or if i need to buy anything to make it fit.

 

[360glitch]

It will bolt on. I would recommend a set of hubcentric rings as well.

https://www.discounttire.com/learn/hub-rings

 

[Doc_Mello]

18x9.5 +25 offset?! Guess lowering your car more than 1” is out of the question.

With those specs, the wheels will stick out beyond the fender. https://www.fitmentindustries.com/w...l_offset_from=24&year=2018&wheel_offset_to=27

 

[Alphaskoom]

5 X 100 and 5 x 114.3 is 2 different lug "spacing" the 5 is the number of lug nuts / bolts, and the other number is the number in milimeters for how far they are spaced out basically. If you notice on your wheels you have 10 lug bolt holes, so that wheel can fit 2 different lug nut spaced vehicles. you will just end up using the more widely spaced ones while the other 5 will remain unused.

 

[Alphaskoom]

yea i wouldnt go beyond +35 offset or lower. - offset is how far the mounting spot of the wheel to the hub sits from the dead center of mass, the smaller that number, the more it will stick out, for refrence i believe our factory wheels are about a +50. There's many different wheel fitting calculator visualization programs online you can look at, plug in some numbers and play around with some numbers to figure out how they impact the fitting.

Sponsored