Wheel fitment? (Help)

[_1slowsi_]

I am on d2 lowering springs will these fit?
Rays gramlights 57xtreme DR 18 x 9.5 +38
With 255 35 18 tires

Sponsored

 

[bbeem]

They'll poke .5” which looks not good. Lock to lock they'll rub. Hitting bumps they'll rub. Tab delete and fender roll required. I'd look into 9" wheels on si. -38, -40, -45 offset is good.

 

[_1slowsi_]

They'll poke .5” which looks not good. Lock to lock they'll rub. Hitting bumps they'll rub. Tab delete and fender roll required. I'd look into 9" wheels on si. -38, -40, -45 offset is good.

Thank you... still learning about wheel fitment

 

[WhiskeyTango]

They'll poke .5” which looks not good. Lock to lock they'll rub. Hitting bumps they'll rub. Tab delete and fender roll required. I'd look into 9" wheels on si. -38, -40, -45 offset is good.

Those won't poke. Thats probably the most common fitment size on all 10th gens.

 

[_1slowsi_]

Those won't poke. Thats probably the most common fitment size on all 10th gens.

Will those rub?

 

[bbeem]

Those won't poke. Thats probably the most common fitment size on all 10th gens.

My 9" -40 pokes just a c hair. You might almost consider it flush. This would poke 8mm more so I'd call it a minor poke.

It will fit for sure and people run it... You'll also rub a little lock to lock and on big bumps on d2 springs. I rub just a little on 17x9-40 255/40 on pro kit which isn't as deep as d2 springs.
https://www.willtheyfit.com/index.p...2=35&wheel_size=18&wheel_width=9-5&offset2=38

 

[GoldClass]

Will those rub?

Run with 235/40 on 18 x 9.5 +38 will be safer on d2. 235 will stretch in and give some allowance to prevent rubbing on the tab when the spring is compressed. But if 255/35, go for +45. 255/35 is more towards a square setup and safer to push in the wheel with +45 offset.

 

[Unity Performance]

235/40 or 245/35 will be your best bet for tires that won't rub. Pull the guide pins from the top, and you'll get -0.8 camber at the front. If you want more camber for clearance, add adjustable lower ball joints that will get you to -1.6 front camber. We've added these to our Si's for clearance and track use

https://unity-performance.com/products/whiteline-adjustable-lower-ball-joints-all-civic-excl-type-r

Sponsored