What Wheel Bearing Removal Set to buy?

nickname

Senior Member
Joined
Apr 20, 2019
Threads
89
Messages
979
Reaction score
364
Location
Houston
Vehicle(s)
'16 Civic Touring
Country flag
Hit a few curbs and now need to replace front drivers wheel bearing.

My tech friend printed the R&R. I have all the tools except the bearing race and seal drivers.

I bought this one last night and don't think it will work:
https://www.harborfreight.com/Bearing-Race-and-Seal-Driver-Set-10-Pc-63261.html

I'm thinking I'll need this one because Honda is using specific sizes:
https://www.harborfreight.com/Front-Wheel-Drive-Bearing-Remover-and-Installer-Kit-21-Pc-63728.html

Also, the R&R is showing I need something that looks like this:
https://www.harborfreight.com/Bearing-Separator-and-Puller-Set-62593.html

So, what do I need and what do I not need?
Sponsored

 
OP
OP
nickname

nickname

Senior Member
Joined
Apr 20, 2019
Threads
89
Messages
979
Reaction score
364
Location
Houston
Vehicle(s)
'16 Civic Touring
Country flag
Honda is wanting to charge 2.5 hrs for the entire R&R @ $325.

I can buy all the tools for less than that.

Only thing is I don't want to buy something I don't need....
Guess I could buy it and return them
Anyone here replace their front wheel bearings?
 

teders

Senior Member
First Name
Ted Dorosheff
Joined
Aug 1, 2017
Threads
56
Messages
464
Reaction score
351
Location
Mclean, Virginia
Vehicle(s)
2017 Honda Civic SI
Vehicle Showcase
1
Country flag
Honda is wanting to charge 2.5 hrs for the entire R&R @ $325.

I can buy all the tools for less than that.

Only thing is I don't want to buy something I don't need....
Guess I could buy it and return them
Anyone here replace their front wheel bearings?
Hey did you ever figure out what you needed to replace your wheel bearing?
 
OP
OP
nickname

nickname

Senior Member
Joined
Apr 20, 2019
Threads
89
Messages
979
Reaction score
364
Location
Houston
Vehicle(s)
'16 Civic Touring
Country flag
Hey did you ever figure out what you needed to replace your wheel bearing?
Nope. Bought an entire knuckle assembly from ahparts and just replaced the whole thing
 

canatto

New Member
First Name
Canuck
Joined
Nov 24, 2017
Threads
0
Messages
1
Reaction score
0
Location
Canada
Vehicle(s)
16'EX
Country flag
None of the three. They are for separating bearing from wheel hub. 10Gen civic has one-piece hub-bearing assembly, when the bearing goes bad, you replace the assembly. If you live where roads are not salted in winters, you can do it without special tools.

Correction: the above is true only for rear wheel bearing-hub. If we are dealing with the front wheel bearing we do indeed need bearing separation tools.
Sponsored

 
Last edited:


 


Top