What did you do to your Type R today?

[MrTuckers]

Bummer. I actually find that I use 12mm for a few things. My other driver is a older Jeep Wrangler.
I occasionally fill the role of mekanik.

This is the season for dead batteries, and usually the bolt that holds down the battery box is a 12mm

you could always try to send it with a 1/2” socket? I don’t think those horn bolts are gonna be mad torqued

Yup, tried to go the imperial route but to no avail- spun it around by hand and there were no grabbing points. At that point I put my hands up and said time to place an Amazon order again.

Sponsored

 

[RBrackett]

Yup, tried to go the imperial route but to no avail- spun it around by hand and there were no grabbing points. At that point I put my hands up and said time to place an Amazon order again.

1/2" wont work. 15/32" worked like a charm for me and had zero issues getting it seated an loosened, they're tight but not super tight

 

[flipnrr]

BRIDE granted my wish of a seat that would fit a tall and chunky guy like me! ?

BRIDE Japan ZIEG IV carbon “WIDE”

 

[bushido69]

BRIDE granted my wish of a seat that would fit a tall and chunky guy like me! ?

BRIDE Japan ZIEG IV carbon “WIDE”

Nice. Please post pix once it’s been installed.

 

[RepyT]

Did a little parking lot detail after work. The goofy-roofy Type R logo is visible from overhead.

Did inside at home, this the Before pic,
On the steering column (above gas pedal) is the Escort Remote Silence/Tag Button.

 

[seselectronics]

BRIDE granted my wish of a seat that would fit a tall and chunky guy like me! ?

BRIDE Japan ZIEG IV carbon “WIDE”

Price and weight? compared OEM?

 

[flipnrr]

Nice. Please post pix once it’s been installed.

Price and weight? compared OEM?

$1,900 per seat. price is a bit more for the wide version and carbon. 17lbs w/o brackets. will weight everything and the OEM plus take pictures once i get them installed.

 

[MrTuckers]

I got the double and get two harness adapters from college Honda

https://www.collegehillshonda.com/product/0S18.html

Wait a min- you guys went straight to the OEM harness? Did you guys consider the amount of current load the new horn requires vs. the stock horns? My trumpets draw about 12A (6A per horn) and so as a precaution, I was thinking of using the relay and running a power wire to my battery instead of possibly frying the wires that come straight from the horn switch itself on the steering wheel. My plan was to run the wire just underneath the plastic front covers far away from any heat sources (aka-engine, radiator) and it's duable. Wire will be protected by plastic wire loom.

 

[flanneljon]

took her out to the Valley of Fire State Park, NV. What a drive :’)

 

[Volksparts]

Wait a min- you guys went straight to the OEM harness? Did you guys consider the amount of current load the new horn requires vs. the stock horns? My trumpets draw about 12A (6A per horn) and so as a precaution, I was thinking of using the relay and running a power wire to my battery instead of possibly frying the wires that come straight from the horn switch itself on the steering wheel. My plan was to run the wire just underneath the plastic front covers far away from any heat sources (aka-engine, radiator) and it's duable. Wire will be protected by plastic wire loom.

I think if they run dual hella horns they should be fine. I've been running them on my wrangler for over a year without a relay and no issues. Now on my Tacoma with 4 hellas that's a whole different story so I ran the relay with power wire like you mentioned. But man hellas are super loud.

 

[Jebuss]

I installed the zl1 standard rock guards today! The fronts look great, but the rears, when viewed from the inside, have a weird flare to them. It's something I'll need to get used to seeing.

 

[whereir]

I just loveeee it soooooo much for nooooo reason omhggggggggg

 

[MrTuckers]

Silver Plus

• Hand Wash & Detail
• Clay Bar Treatment
• 2 layers of Ceramic Pro 9H
• 1 layer of Top Coat
• 10 Year Warranty

 

[r_rated_ctr]

Finally bought and installed my Mishimoto catch can.

 

[izzyC-EX]

Finally bought and installed my Mishimoto catch can.

Sorry for being unaware, but what the heck does that thing do?