- First Name
- Michael
- Joined
- Apr 26, 2021
- Threads
- 27
- Messages
- 1,025
- Reaction score
- 1,195
- Location
- Las Vegas, Nevada
- Vehicle(s)
- 2021 Boost Blue Type R
- Banned
- #15,931
in front of this piece of shit at dominion the other day
Sponsored
Apparently it’s not all abbreviations but “certain letter/character combinations, such as H8, will not be allowed.” So I prob could’ve gotten away with it for sure. Oh well lolWow! So you couldn’t get a vanity plateabbreviation LFOD?
Your New Hampshire state motto is Live Free Or Die.
I’d move!
Instead go for LFOMFD… it’s not cursing like it appears, more politely politically correct, youbetcha’:
Live Free or Make Friends Disappointed.
NoAny one planning to exchange their old Type R for the new Type R?
Super easy overall after I did it the first time. I followed this guide here: https://www.civicx.com/forum/threads/remove-front-fake-vents-without-taking-the-bumper-off.28037/What's the easiest way to pop off the cover? Do you just pry on all sides? I see you have the tape to help protect the paint.
Another project! PCI Seat Mount w/Sliders + Recaro Pole Position FIA. Mounting the seat to the PCI kit was pretty easy, it takes more time to actually assemble the mount and rails as it comes in pieces. We only removed the seat belt buckle assembly and sensor from the OEM seat, and mounted it to PCI. The Airbag Light is currently ON, we're going to figure out a resistor kit and test this setup for a bit before making an all-in-one solution available.
The seat itself feels great! At just about it's highest position I'm about 1.5-2" lower than the OEM seat, and am ok with driving situations for the most part - drive-thru and exiting parking lots I am extra careful to not hit or go over a curb (I'm 5'9"). 6'2" and up thinner build folks, you'll really love these especially if you're tracking your car with a helmet! Due to the seat's thin frame, even sitting beside myself I feel the leg room has doubled. Comfort wise, the first 24 hours was a bit awkward getting in and out, but over the weekend it got better and I haven't gotten out of these with a sore back or butt. My torso is being held firmly in place, and the bolsters are just tall and solid enough that my legs won't need to brace the door panel as I sometimes did with the OEM seats. Seating position feels nice and upright, there are 2 more positions to lean them back if I wanted.
Nope the type r and Si come with the dual horns, so these new ones literally mount to the same spot.Thanks. I'll try this mod. Did you need a bracket for the horn in the back?