What did you do to your Civic today? (II)

[jayman84]

Added a few things to the interior

Where did you get the piece below the shifter?

 

[Saadk4]

Just ordered a custom carbon fiber steering wheel

 

[ehernandez]

I know I know. Car washing isn't a big deal and might not belong here, but I have my crew working so hard on it ?

Also swapped out my Red Honda emblems for black. I like the subtlety.

 

[dstix747]

I see, you have the alcantara one ordered, well the good thing is, they got to be available to serve the 2020 models at some point, so it will show for sure. Next spring does seem long, but it's worth the wait ?

Seeing you have the ST too, I'd give you this advice, many tutorials on YouTube don't involve transferring the shifters, that confused me a little bit. If you look at the picture before the comparison of the 16&18 radio control buttons, you can see on the wheel there're one screw on each side, they hold the shifters, so meaning
1) pry the bezel out first,
2) then pry the radio control buttons and sensing buttons out
3) unscrew the screws for the shifters is the last step.

Step 1 & 2 are held by this rubbery material on the steering wheel, so just be patient, take the new wheel for reference on the mounting spots.

I just have Honda install it. There is a good video from a Honda tech out there about it though.

 

[gtman]

Shocking to see! Aren't there child labor laws?

Seriously though ehernandez, great pics. Looks like a hard working crew.

 

[Mr.Risen1254]

changed shift knob and boot

 

[jakdotdot]

Where did you get the piece below the shifter?

It's the badge from the China market Mugen civic sedan.

https://www.civicx.com/forum/threads/china-launched-15th-anniversary-bodykit-mugen.29393/

 

[kcvpr]

Well, what can I say.... I’ve been quite busy since my last update in this thread.
I’ve added some Enkei RPF1’s 18x8.5 +40mm with some Goodyear eagle F1’s. Got some GTR tuning LED headlight bulbs for the low beams (holy hell are they bright! Great cut off too) and some diode dynamics SLF LED BULBS in yellow for the fogs. Got the FKX honeycomb grill. And in the pst couple days I installed my PRL FMIC and hot/cold pipe kit with a COBRA intake, with a 27WON BBK.

I have on order some stoptech slotted rear rotors and some hawk street 5.0 pads. With a few bottles of ENDLESS RF-650 brake fluid.

Not sure what to do next ?

 

[U.S.C]

Took my LX diffuser off and put this 2020 diffuser on and got custom exhaust ran out the middle.

 

[kcvpr]

Took my LX diffuser off and put this 2020 diffuser on and got custom exhaust ran out the middle.

Where did you get that roof wing and trunk wing at? Looks nice

 

[Robot3RK]

Put the two Thenice Red Pieces in for the AC Buttons and the two Red Trim Pieces in the Center Under Shift Knob. Also did some audio upgrades by adding two JL Audio tweeters since the regular sport trim didn't come with any tweeters and replaced two front door speakers with two Cerwin Vega 6.5s. Going two replace the rear door speakers later and will also add another pair of tweeters in the rear later to complete the audio setup. Currently running on stock amp. Not sure if I will add two rear Touring Based C pillers with two midranges speakers later as that setup is going to be much more difficult since that housing area is too thin or shallow for any aftermarket midrange speakers to fit.

 

[WF19]

changed shift knob and boot

So you had to learn to read Japanese to be able to shift

 

[Phy]

Took my LX diffuser off and put this 2020 diffuser on and got custom exhaust ran out the middle.

Any pictures of the underside?

 

[U.S.C]

Where did you get that roof wing and trunk wing at? Looks nice

Roof spoiler is oem. Just added boomba racing raisers. And the gurney flap is from downforce solutions

 

[AutobacsJM]

Roof spoiler is oem. Just added boomba racing raisers. And the gurney flap is from downforce solutions

What about the wheels? Are they actual TEs? looks great.

Sponsored