Was gonna get these used wheels

[Tyler.iguess]

But they are 18x9.5 +38,
Mine now are same style. Cepr 18x8 +45
If i picked the 2x 9.5s up, would i possibly run into fitment issues up front?
Lowered on sportlines
Would probably run 255/40s or so

Sponsored

 

[GoldClass]

18x9.5+38 alone is already poke out beyond the fender. If wrap with 255/40 for a square setup and further 1.7” lowered up front, it will rub everywhere. You probably need to pull or roll the fender or camber kit with stretch setup.

Are you also thinking of staggered setup?

 

[Tyler.iguess]

Eh,

18x9.5+38 alone is already poke out beyond the fender. If wrap with 255/40 for a square setup and further 1.7” lowered up front, it will rub everywhere. You probably need to pull or roll the fender or camber kit with stretch setup.

Are you also thinking of staggered setup?

I was actually. Lol
I underestimated how low it was gonna be lol.
The offset is the only thing i was iffy on.
Fitmentindustries gallery, i have found quite a few with 9.5+38 and sportlines or other pretty low springs.
But i rather tire be flush with the fender qnd be past the wheel.

 

[Kotaas]

18 9.5 38 with 255/35 almost fit flush with the fender the poke is minimal that’s the setup I’m running on my si sedan

 

[360glitch]

18 9.5 38 with 255/35 almost fit flush with the fender the poke is minimal that’s the setup I’m running on my si sedan

I don't recall the tire size but I had those spec wheels on my Si and they didn't poke from what I could tell. Was using Silvers coilovers at the time.

 

[Tyler.iguess]

I think most people with the 9.5s are running prokits. Not the sportlines
Made use of my aluminum skid olate last night lol

Sponsored