VSA Completely off?

[Naruske]

So i know that just holding the VSA button until the light comes on does not fully deactivate it. I remember recently someone posted the steps on how to achieve this but i can't seem to find it anymore. Can anyone refresh my memory???

Sponsored

 

[SilverGhost]

1. Turn car on
2. Parking brake off
3. Press and hold brake pedal
4. Turn traction control on and off
5. Release brake pedal
6. Parking brake on
7. Turn traction control on and off
8. Press and hold brake pedal
9. Turn traction control on and off
10. Traction control light should be solid and another light blinking

Yep

 

[Naruske]

Yep

Thank you so much dude!! This is exactly what i was looking for lol

 

[SilverGhost]

Yep

 

[chokesmaster]

I tried that on my Canadian LX and it didn't work :/ . I would assume that it's something common on Canadian models?

 

[dc2turbo]

I tried that on my Canadian LX and it didn't work :/ . I would assume that it's something common on Canadian models?

it should work. you might of messed up on one of the steps.

took me a few tries the first time

 

[xcivicx]

the first time turning the control on then off (step 4)? when car is first started its on so then do we turn off then on then off?

 

[dc2turbo]

the first time turning the control on then off (step 4)? when car is first started its on so then do we turn off then on then off?

what it means is to push the vsa button til the light comes on then again to turn off the light

 

[VitViper]

We just disable it in the software if needed/wanted.

 

[NorthernEX-T]

I tried that on my Canadian LX and it didn't work :/ . I would assume that it's something common on Canadian models?

It works fine in Canada.

 

[macrossranma]

can anyone confirm if below step will also disable ABS? If it doesnt, can anyone recommend the easiest way to disable/endable ABS ?

1. Turn car on
2. Parking brake off
3. Press and hold brake pedal
4. Turn traction control on and off
5. Release brake pedal
6. Parking brake on
7. Turn traction control on and off
8. Press and hold brake pedal
9. Turn traction control on and off
10. Traction control light should be solid and another light blinking

 

[Robotaz]

I guess it's been said many times over, but that's ridiculous to have to do just to get the VSA off. How in the world did anyone figure this out?

 

[eha1988]

@KTuner should add a function to completely disable VSA when pressed in it's settings

 

[Axatax]

We just disable it in the software if needed/wanted.

Too bad you seem to have absconded.

So what exactly is and isn't disabled with the just the VSA button? I assume the brake procedure is also disabling ABS?

 

[Ataricade]

I guess it's been said many times over, but that's ridiculous to have to do just to get the VSA off. How in the world did anyone figure this out?

It’s prob in the service manual

Sponsored