Type R Roll Cage

Highside49

Member
Joined
Oct 9, 2018
Threads
2
Messages
8
Reaction score
1
Location
Jacksonville, Florida
Vehicle(s)
2015 Porsche 911 Carrera 4S; 2016 Toyota Tundra 1794 Edition; 2018 Honda Civic Type R
I was looking at this roll cage on the Evasive website. I have a question and I'm hoping someone has experience/knows the answer. This cage does not run bars by the driver/passenger doors. So my question is: Is this cage compliant to use for SCCA racing? I guess I could go to the source and call SCCA but thought I'd give it a shot on here first. Thank you.
 


Highside49

Member
Joined
Oct 9, 2018
Threads
2
Messages
8
Reaction score
1
Location
Jacksonville, Florida
Vehicle(s)
2015 Porsche 911 Carrera 4S; 2016 Toyota Tundra 1794 Edition; 2018 Honda Civic Type R
JLORacing, thank you for the reply. Yes, I will do track days to practice but I want to race SCCA at Roebling Road and Road Atlanta. Occasionally I will travel to VIR. I was told about United so I'm going to contact them. Again, thank you for the input.
 

Frackz

Senior Member
First Name
Snoop
Joined
Sep 2, 2018
Threads
1
Messages
112
Reaction score
56
Location
Toronto
Vehicle(s)
2018 Civic Type R, 2018 Audi RS3
Country flag
Can I see a picture of the bolt points please? On the floor and back brackets? Greatly appreciated
Going to assume the rear is bolted into stock points no cutting - as they advertise.

But the front floor needs to be drilled. this is just my assumption. I have emailed, messaged on IG etc asking for install instructions or if any drilling is needed but no response.

I think i will end up with the USR harness bar as they are straight forward in stating how its installed and the mount points.
 
Last edited:

Frackz

Senior Member
First Name
Snoop
Joined
Sep 2, 2018
Threads
1
Messages
112
Reaction score
56
Location
Toronto
Vehicle(s)
2018 Civic Type R, 2018 Audi RS3
Country flag
got confirmation only the rear is bolt in the front you need to droll holes :)

Looks like USR harness bar it is:)
 


Sales@USR

Senior Member
First Name
USR
Joined
Dec 20, 2018
Threads
3
Messages
134
Reaction score
329
Location
Cumming, GA
Website
www.unitedspeedracing.com
Vehicle(s)
2017 Honda Civic Type R
Vehicle Showcase
1
Country flag
or you can send it over to us and we can go full cage, only minor trimming required, lol Here is 1 of the 2 SCCA T2 class cares we are building for customers right now.

Honda Civic 10th gen Type R Roll Cage 50230693_2266716213540813_1632615660183879680_n


Honda Civic 10th gen Type R Roll Cage 50234846_2239473072957252_1061545199211118592_n


Honda Civic 10th gen Type R Roll Cage 50593783_2084956234904153_3445971008836599808_n


Honda Civic 10th gen Type R Roll Cage 49845090_621999278250686_5552245480718598144_n


Honda Civic 10th gen Type R Roll Cage 50621366_291024138434487_3777032104534081536_n


Honda Civic 10th gen Type R Roll Cage 50151309_236892750576855_7876212538956840960_n
 

high718

Senior Member
First Name
Andrew
Joined
May 31, 2018
Threads
7
Messages
147
Reaction score
141
Location
Tampa florida
Vehicle(s)
18 Civic Type R, 10 Acura TSX, 16 Yamaha R1
Country flag
we have a new design that helps save on shipping also. Still the same, but now the main hoop is 3 pieces.
@Jason@USR do you have photos of the new 3 piece design. Also is the price the same?
 

teemohnay

Member
First Name
Tyler
Joined
Sep 18, 2019
Threads
0
Messages
15
Reaction score
6
Location
Houston
Vehicle(s)
2018 Honda Civic Type R
Country flag
Can I see a picture of the bolt points please? On the floor and back brackets? Greatly appreciated
I am installing the EVS cage this weekend in my type R. Can anybody tell me specifically how to mount the fronts? Do I need to Weld a back plate in? Not sure specifically how this works
Sponsored

 


 


Top