Type R front bumper conversion

[FK7Build]

find some picture on the hatch with the conversion

Do you know if it's compatible with the Honda Sensing on the driver's fog light cover?

 

[FK7Build]

The front fits, but I know 2020 has Honda Sensing which is a slight issue. There is a mod to get it to work on these forums, I'll let you know when i find it (somebody may beat me to it, but there's definitely a yes to that).

Were you able to find the mod to get Honda Sensing to work?

 

[Redline007]

Would you guys pull a trigger on this mod ??
https://www.ebay.com/itm/Fits-16-17...-PP-/391948280690?vxp=mtr&hash=item5b41f02372

They suck don't buy from them if you do make sure when you return something you watch them they will intentionally mess up your items and you will need to do a lot of body work to make it fit like OEM

 

[Redline007]

Do you know if it's compatible with the Honda Sensing on the driver's fog light cover?

 

[FK7Build]

Not sure if I asked this, but are those OEM fenders bumper and side skirts from FK8? If so, how was the fitment?

 

[Redline007]

Not sure if I asked this, but are those OEM fenders bumper and side skirts from FK8? If so, how was the fitment?

All OEM then fenders Requires 3 pieces and all new brackets the side rocker panel Is needed if you decide to use OEM fenders both fender liners

 

[FK7Build]

All OEM then fenders Requires 3 pieces and all new brackets the side rocker panel Is needed if you decide to use OEM fenders both fender liners

Wow thank you for the information. I have been searching for someone who has done this for over three months. How did you do the rear flares?

 

[Ashto713]

Well I got into an accident couple weeks ago, needed a new front bumper so I decided to go with this front bumper. I just got my car back from the body shop today and it turned out much much better than I had expected. I definitely want that rear end eventually as well now. My car is a Si sedan btw.

Did they supply the bumper of did you have to get it separately?

 

[fk7mio]

I got the socal accessories front bumper conversion and I’m very happy with it, fitment isn’t perfect but you can only really tell if your looking for it

 

[FK7_On_The_Luce]

j_babsR1 I smoked a brake drum in the middle of the road this morning and need to replace my smashed in bumper. Do you have part numbers for the front end conversion. Did you use OEM parts or an ebay conversion?

 

[Cabbage]

Anyone with a type r front end have the prl cobra cai and know of any figment issues.

Also the stock bumper on the si does a good job at blocking water from entering the area where the intake sits and I’m curious if the 4 holes on each side of the bumper are directly in front of where the filter sits

 

[SnailBiggs]

find some picture on the hatch with the conversion

Do you think this would fit the coupe as well?