Si TSP Tune Stage 1 vs Hondata basemap

[markpasquel]

Car is running:
Mishimoto Intake
PLM Downpipe
PLM Frontpipe
Greddy catback
94 Octane (10% ethanol)

Run file #1 is TSP tune and the second run is the Hondata basemap @ +9 PSI.
Not much of a difference.. what are your thoughts?

 

[10GenPearlSi]

Car is running:
Mishimoto Intake
PLM Downpipe
PLM Frontpipe
Greddy catback
94 Octane (10% ethanol)

Run file #1 is TSP tune and the second run is the Hondata basemap @ +9 PSI.
Not much of a difference.. what are your thoughts?

Very interesting results! Confusing though. When Vit posted +9 tune it showed a lot less whp than you show, but it wasn't FBO. Derek Robinson showed more whp than you with no bolt-ons. It doesn't compute. There is something that I must be missing.

 

[D-RobIMW]

Interesting results; happen to have datalogs of the runs?

 

[thatlilwhiteone]

Oh that's why my clutch slipped lol

 

[caspar21]

Very interesting results! Confusing though. When Vit posted +9 tune it showed a lot less whp than you show, but it wasn't FBO. Derek Robinson showed more whp than you with no bolt-ons. It doesn't compute. There is something that I must be missing.

remember all dynos are different to the point that they are only accurate for direct comparisons. thats why the op did the 2 runs side by side.

 

[Pur3MotioN770]

I'm assuming you were running map 3 during the TSP Stage 1 dyno run?

 

[Micah]

How much time spent driving after flashing for the ECU to learn?

 

[OceansX]

Car is running:
Mishimoto Intake
PLM Downpipe
PLM Frontpipe
Greddy catback
94 Octane (10% ethanol)

Run file #1 is TSP tune and the second run is the Hondata basemap @ +9 PSI.
Not much of a difference.. what are your thoughts?

hows the fume smell with PLM dp/fp?

any issues at all?

Sponsored