Thuseefc - Mugen Si

[Thusee]

Heres what they said regarding the stamp...
"It's DOT / SAE but not stamped yet , as manufactuer forgot to stamp".

[/Q]

That's actually ctually funny

Sponsored

 

[Thusee]

Tuning as begun as of today! Getting the car E-Tuned by Drob!

(https://www.imwtuned.com/)

Let's see what this does!

 

[Thusee]

Threw on the summers yesterday.
Waiting for Michelin ps4s to arrive still but I had a set of Michelin PSS. So threw the PSS for now.

255/35r18 meaty! Need to roll my fenders slightly but fits good!

 

[Doc_Mello]

Threw on the summers yesterday.
Waiting for Michelin ps4s to arrive still but I had a set of Michelin PSS. So threw the PSS for now.

255/35r18 meaty! Need to roll my fenders slightly but fits good!

Nice fitment! At the risk of sounding blasphemous, if you raise it up a tad, 1/2”, you won’t need to roll the fenders. Plus, the ride quality will be a bit better. Ask me how I know.

 

[Thusee]

Nice fitment! At the risk of sounding blasphemous, if you raise it up a tad, 1/2”, you won’t need to roll the fenders. Plus, the ride quality will be a bit better. Ask me how I know.

I was considering it but with +38 and 255 the wheels will have too much poke if raised. I do plan on raising the rear slightly. The front just needs a very light fender roll. Nothing crazy.

With the 245 I had no rub since it had a light stretch.

I had zero rub on my way home with my suspension on full stiff though and the ride wasn't bad at all

 

[Thusee]

So far the first Drob starter tune has been amazing! Can't wait for the next revision.

Pic for attention...taken by my good friend.

@clickautopics

@Vincent@27WON peep this

 

[GRE3N]

I was considering it but with +38 and 255 the wheels will have too much poke if raised. I do plan on raising the rear slightly. The front just needs a very light fender roll. Nothing crazy.

With the 245 I had no rub since it had a light stretch.

I had zero rub on my way home with my suspension on full stiff though and the ride wasn't bad at all

Same here I put on 245s pilot 4s with new Aodhan rims, on Yesteday with 9.5w there perfect. Very slight stretch but not much at all. Best part is no road noise even at High speeds, impressive. Sticks real well. I wanted thicker side walls but glad I didn't go that way.

 

[GRE3N]

Threw on the summers yesterday.
Waiting for Michelin ps4s to arrive still but I had a set of Michelin PSS. So threw the PSS for now.

255/35r18 meaty! Need to roll my fenders slightly but fits good!

Looks awesome!

 

[Thusee]

Same here I put on 245s pilot 4s with new Aodhan rims, on Yesteday with 9.5w there perfect. Very slight stretch but not much at all. Best part is no road noise even at High speeds, impressive. Sticks real well. I wanted thicker side walls but glad I didn't go that way.

I had 245/40 before as well. Just switched to 255/35

 

[Vincent@27WON]

So far the first Drob starter tune has been amazing! Can't wait for the next revision.

Pic for attention...taken by my good friend.

@clickautopics

@Vincent@27WON peep this

look at them shoes.

 

[Thusee]

On revision 4 now! Car feels amazing! So amped to see where it ends up!

Another pic for attention

 

[Los1391]

Car looks great man!
Which hood dampers did you purchase?

 

[Thusee]

Car looks great man!
Which hood dampers did you purchase?

Appreciate it!

I bought off Amazon 3 years ago. I dont have a link anymore

 

[Thusee]

Rolled my fenders the other day just to get a little more clearance.

255/35r18 Michelin pss
18x9.5+38

The 255 were rubbing on dips when I had my suspension on medium on the dampers.

Did a roll and light pull and now I can drive on FULL SOFT and I have zero rub. This was the first time rolling fenders myself so was a little scary lol.....lots of heat and short passes turned out great. Had to pull the side marker out as well to line up with the new stretch. Overall can't tell it's rolled and pulled. Satisfied with the results.

 

[Thusee]

Ran into a little issue with my ktuner
Everytime I hit a bump on the road the unit would restart so when I'm doing datalogs I lose that info and have to do it again....found this....been sent out to Ktuner for repair so have to wait on the datalogging.

I'm currently on revision 6....so I'm almost done the etune with Drob!

Sponsored