Thuseefc - Mugen Si

[Thusee]

which hood shock kit did you buy?

Just a set off Amazon or Ebay forget from where...it was like 45$ cad.

Sponsored

 

[das borgen]

New fogs

New fog light from @skleds on ig which will be sold by: www.unity-performance.com. These fog lights look beautiful and if you have the LED headlights then these fogs flow very nice with the design.

aka @CanadiaegeanBlue (Humza)

Humza has the white led on his Si and I have the Yellow (with film) on mine.

I previously had the Morimotto XB Led fogs and they did great! Definitely an amazing upgrade over stock.

Here are some pictures!

Do you have any solid tips on removing those bumper inserts? I want to do that but I'm very concerned about scratching my bumper in the process

 

[Thusee]

Do you have any solid tips on removing those bumper inserts? I want to do that but I'm very concerned about scratching my bumper in the process

using a plastic trim tool start at the top of the fog cover and start popping the clips, once the top comes free and sides, reach down and pop the single clip up/push pin however you want to call it...then the cover comes off. I can pop them off in a few seconds.

There should be some youtube videos you can check as well. (BUMPER DOES NOT NEED TO COME OFF)

 

[Thusee]

New badge arrived

 

[Thusee]

Thanks to @Vincent@27WON I'll be testing out the new Race maf very soon! But first must install emans clutch kit and hoping today is the day!

 

[balistek]

I’m assuming Mugen skirts. Which front lip. Gorgeous build btw

 

[Thusee]

I’m assuming Mugen skirts. Which front lip. Gorgeous build btw

Thanks buddy and have to go with the complete kit, can't just go half way.....

 

[Thusee]

Emans type R retrofit clutch, prl SS clutch line and upgraded cmc

Look at the burn on the stock clutch!

 

[Thusee]

Since the subframe was off this was the perfect time to install the whiteline 27mm front sway bar with adjustable endings.

The steering rack must be removed in order to install the strut bar.

Got these from www.unity-performance.com aka @CanadiaegeanBlue

 

[arpypat]

Since the subframe was off this was the perfect time to install the whiteline 27mm front sway bar with adjustable endings.

The steering rack must be removed in order to install the strut bar.

Got these from www.unity-performance.com aka @CanadiaegeanBlue

Damn, that doesn't look like a fun install at all lol.

How's the ride with the Tein coils BTW?

 

[Thusee]

Damn, that doesn't look like a fun install at all lol.

How's the ride with the Tein coils BTW?

Absolutely love it! Definitely recommend it and if you go with it I recommend getting the edfc setup as well.

 

[arpypat]

Absolutely love it! Definitely recommend it and if you go with it I recommend getting the edfc setup as well.

Glad to hear! I had Tein SAZ coils on my 3rd gen 6mt TL along with new Type S upper mounts and it rode like a dream!

I ended up getting ktuned lowering springs a couple weeks ago, but kind of regret not going with the Tein coils... Will def get them when my struts are shot ?

 

[Thusee]

Glad to hear! I had Tein SAZ coils on my 3rd gen 6mt TL along with new Type S upper mounts and it rode like a dream!

I ended up getting ktuned lowering springs a couple weeks ago, but kind of regret not going with the Tein coils... Will def get them when my struts are shot ?

I went with tein mainly because I had them on my Prelude with the edfc and pillow ball too mounts.

So I had the experience already. Which is why I initially put on eibach springs and waited until Tein released their coil overs to get it.

The springs sold instantly.

 

[Thusee]

Koyo rad install...thanks again to @CanadiaegeanBlue aka www.unity-performance.com

Also replaced my AC condensor and sprayed it a light coat of black to make it look stealth behind the grill.

Had a moment to see all the @Vincent@27WON products all in one....

 

[Thusee]

MUGEN POWER

Photo dump....just because

Mugen Front and Sides installed and was purchased from King Motorsports.

Quite a bit of work was involved in putting the front lip on had to drill a few spots into the front bumper underneath. Overall pleased with the install!