Testing Competition Clutch Stage 2 with 20 lb Single Mass Flywheel

[Jes_si562]

How fried was the OEM clutch when you took it out? Got any pictures?

Yeah I’ll take some when I get home it’s in my truck of my car. And honestly I expected to be worse but it wasn’t bad at all. The disc still looked new but it was getting there. When i took of the pressure plate man I got covered in clutch material lol. Pressure plate and flywheel surface was getting cooked you can tell it was slipping, it has a bunch of heat marks

Sponsored

 

[Jes_si562]

Here is pics of the old caca clutch

 

[Lunarsilver17]

Any update on competition clutch, any issues with lockout? Is it fine for daily driving?

 

[Sport-injected]

How fried was the OEM clutch when you took it out? Got any pictures?

Cmc is available on emans website, not sure if you seen

 

[Masked]

Cmc is available on emans website, not sure if you seen

Im not getting any lockouts anymore! I love this clutch

 

[Sport-injected]

Im not getting any lockouts anymore! I love this clutch

That's awesome! So happy to hear that.

 

[Jes_si562]

I love my clutch to I just have chatter but it’s because I don’t give it gas other then that it’s awesome

 

[vieux georges]

To Masked,
After the runnind-in period, is the pedal still hard ?
Isn't the point of engagement too rough for city traffic ?
Thank you for answering me .

 

[Jes_si562]

To Masked,
After the runnind-in period, is the pedal still hard ?
Isn't the point of engagement too rough for city traffic ?
Thank you for answering me .

It’s stiff at first but once you put miles into it, it gets way softer feels stock

 

[Masked]

To Masked,
After the runnind-in period, is the pedal still hard ?
Isn't the point of engagement too rough for city traffic ?
Thank you for answering me .

Exactly what @Jes_si562 said, stiffer at first but its gets softer after a few hundreds kilometres

 

[CanadiaegeanBlue]

Everyone's Comp Clutch Stage 2 with 22lb flywheel going well?

 

[Sport-injected]

Everyone's Comp Clutch Stage 2 with 22lb flywheel going well?

Mines backordered until early November... ?

 

[Masked]

Folks who have installed the kit already, did you guys use the supplied Pilot Bearing?

There's many posts about the CTR Retrofit option that say that this Civic transmission doesn't need to add it.

Everyone's Comp Clutch Stage 2 with 22lb flywheel going well?

Mine is still going strong! There's no negative about that clutch

 

[Kevjim20]

Im not getting any lockouts anymore! I love this clutch

What issues were you having with lockouts? I’m currently having the same issue after installing a stage 3 competition clutch

 

[Masked]

What issues were you having with lockouts? I’m currently having the same issue after installing a stage 3 competition clutch

To fix the lockouts you will need to upgrade the CMC if you have an upgraded clutch. I personally don't redline my car enough to experience lockouts, I usually shift before the lockouts happen near redline. There's two options available, the Sirimoto CMC version 2 or the KzCMC. You can find both by googling it. But yeah you will need to spend a bit more money to fix this issue.

Sponsored