System Motorsports - Reverse-Staggered 18x11 / 18x9.5 Volk TE37 Saga for the FK8 Civic Type R Platform (Aggressive)

[System Motorsports]

Hi all,

Very excited to debut our latest shop spec - Reverse-staggered 18x11 / 18x9.5 TE37 Saga in F5 (Max concave, fronts) / F4 (rears)! Aggressive track-setup, catered to track enthusiasts.

Previously, FK8 Civic Type R owners were only able to achieve Face 3 concave with the TE37 Saga model while maintaining brake clearance. In our opinion, Face-3 still looked too flat, so we produced a test run with Japan in Face 4 (18x9.5 +33/18x9.5 +39). We were met with high-demand and satisfied customers from these batches, so we decided to push for Face 5 concave, while maintaining adequate brake clearance. This is the result we have come up with! This size enables FK8 Type R owners to fit a 295 tire up front.

NOTE: Please keep in mind that this spec is very aggressive and will require extensive modification to fit on a street car. This is not a bolt-on affair like many of the other sizes that we offer to the community.
- Coilovers may be required for inner strut clearance. Confirmed clearance on FA500s, and a variety of others. Certain coilovers may require a spacer for inner clearance depending on the size of the linear spring (progressive springs will not work).
- Fender modification (trim/bend front tab, trim rears, slight trimming to liner) is REQUIRED.
- Track alignment is also required to fit these.

Details:
- Fronts: Rays Volk TE37 Saga 18x11 +37 5x120, shown equipped with 295/30/18 A052 Yokohama
- Rears: Rays Volk TE37 Saga 18x9.5 +33 5x120, shown equipped with 265/35/18 A052 Yokohama
- System Motorsports Batch Exclusive Sizing
- TE37 Saga Model, Forged Monoblock Construction
- Valvestems included
- Color offerings: Bronze / Diamond Black / Mag Blue / Diamond Dark Gunmetal / Matte Blue gunmetal (Reach out to us directly to order/inquire!)

To purchase:
https://www.systemmotorsports.com/c...e-rear-aggressive-fk8-type-r-fitment-set-of-4

Some photos, mounted up!

 

[REC13]

That looks straight out of Tsukuba time attack! I think it looks great for a track set up that necessitates extreme front end grip. I'm sure over kill for the novice track day enthusiast.

 

[Ultimateone]

That is wild

 

[System Motorsports]

Ride height settled, fine-tuned the alignment and took it for a drive around the City.

Very content with how the car drives and feels now. The way we have it setup, there are zero rubbing issues, granted the car has a very aggressive track alignment.

 

[System Motorsports]

Good morning guys,

These are landing in approximately ~1-2 weeks. We did another rerun for those who missed out!

TE37 Saga S-Plus 18x11 +37/18x9.5 +33 5x120 (Face-5/Face-4)
Bronze

TE37 Saga S-Plus 18x10.5 +42/18x9.5 +33 5x120 (Face-4)
Bronze
Diamond Dark Gunmetal
Matte Blue Gunmetal

 

[System Motorsports]

Alright fellas - sets are now ready to ship after doing a full rerun of our popular reverse-staggered setup for the FK8 CTR platform - now available in a NEW size.
Now ready to ship in limited qty.
Technical specifications:

TE37 Saga S-Plus - Reverse-staggered exclusive spec

Spec #1

• Front: 18x11 +37 5x120 , Face-5 Concave
• Rear: 18x9.5 +33 5x120, Face-4 Concave
• Rays original test: JWL+R Spec + VIA certification
• Hub Bore 72.56mm. M14 Lug Pockets
• Included: Rays Metal Valvestems
• Configured to accommodate up to a 295/30/18 + 265/35/18 Front/Rear respectively on the FK8 CTR platform. Aggressive fitment, coilovers w/ linear springs with adjustable tophats + adjustable rear arms are a prerequisite.
• Color in-stock: Bronze

Spec #2

• Front: 18x10.5 +42 5x120 , Face-4 Concave
• Rear: 18x9.5 +33 5x120, Face-4 Concave
• Rays original test: JWL+R Spec + VIA certification
• Hub Bore, 72.56mm. M14 Lug Pockets
• Included: Rays Metal Valvestems
• Configured to ALSO accommodate up to a 295/30/18 + 265/35/18 Front/Rear respectively on the FK8 CTR platform. Aggressive fitment, coilovers w/ linear springs with adjustable tophats + adjustable rear arms are a prerequisite. This is a more modest fitment relative to Spec #1 and sits 11mm inward compared to 11 +37. We still recommend coilovers with a linear spring for maximum inner barrel clearance.
• Colors in-stock: Bronze, Matte Blue Gunmetal, Diamond Dark Gunmetal

These were our limited offering for some time - We catered to those who were looking to enhance mechanical grip on the FK8 CTR platform. Please keep in mind that the rear offsets will require one to trim/shave the rear fender under the "flare" as well for maximum clearance at full compression.
Shown are our clients cars running 295/265 staggered F/R.

These sets are centercap-compatible and will fit any of the TE37 Saga, ZE40, TE37 Ultra, G25, and regular O-ring centercaps. If you are unsure, please reach out to us for direct assistance.
To order, get in touch with me directly. Sets ship via UPS/Fedex Ground and are located in the SF Bay Area, also available for will-call for those who want to save on freight costs.

Separately, for those who are looking for a squared setup, a more conservative fitment, and/or other colors, we also have these in-stock below. Anything else not listed is treated as "special-order" only and will command lead times north of ~8-12+ months.

TE37 Saga S-Plus 18x9.5 +39 5x120 - Face-3 Concave
TE37SL 18x9.5 +45 5x120 - Concave Face
TE37SL 18x9.5 +38 5x120 - Concave Face
TE37 Saga SL 18x9.5 +38 5x120 - Face-4 Concave
TE37 Saga S-Plus 18x10 +25 5x120 - Face-4 Concave (Aggressive)

Thanks in advance. Enjoy the photos!

 

[Rickyshoots]

what's the deal with getting Racing Green TE37SL in this staggered set up?

 

[System Motorsports]

what's the deal with getting Racing Green TE37SL in this staggered set up?

TE37SL can no longer be ordered from Japan as it is discontinued. In order to do the BRG Racing Green finish on the TE37 Saga reverse-staggered setup, we would have to order another batch. The timeline is north of ~8-12+ months and we would need a binding deposit to lock in your set.

 

[Rickyshoots]

TE37SL can no longer be ordered from Japan as it is discontinued. In order to do the BRG Racing Green finish on the TE37 Saga reverse-staggered setup, we would have to order another batch. The timeline is north of ~8-12+ months and we would need a binding deposit to lock in your set.

What all colors do you have in stock at the moment?

 

[System Motorsports]

What all colors do you have in stock at the moment?

https://www.systemmotorsports.com/collections/in-stock-5x120

As far as the reverse-staggered goes, 18x11 +37/18x9.5 +33 in Bronze. 18x10.5 +42/18x9.5 +33 in Bronze, Diamond Dark Gunmetal, Mag Blue

Sponsored