VinRRR
Senior Member
- Joined
- Sep 5, 2018
- Threads
- 16
- Messages
- 541
- Reaction score
- 365
- Location
- Empire State
- Vehicle(s)
- R16017
- Thread starter
- #1
I just installed swift and noticed that the passenger side springs doesn’t sit tightly against the strut mount bearing when the car is off the ground. I can grab the spring and shake it, and it looks like the spring is more compressed than the distance between the bottom perch and the bearing! The driver side is snug. There’s no weird noise when driving and the drop is even. The car rides perfectly fine. One time, when I dropped the car down, I heard a pop from the spring top perch popping into the bearing. Makes me wonder if I compressed the spring too much during installation. But the spring should expand and push against the bearing. And why only the pas side?
Sponsored
Last edited: