zero no shoten
Senior Member
- First Name
- Brandon
- Joined
- Aug 7, 2018
- Threads
- 4
- Messages
- 67
- Reaction score
- 64
- Location
- Scottsdale, AZ
- Vehicle(s)
- 2021 Sport Hatchback
- Vehicle Showcase
- 1
- Thread starter
- #1
While trying to install my lowering springs we ran into an issue removing the bolt on the sway bar end link.
No matter what we tried, it would just keep spinning. The Allen key stays in place but it still won’t budge when turning the wrench. Sockets couldn’t bust it, impact wrench couldn’t bust it, tried just about everything I could think of.
The problem now is not only that the lowering springs didn’t happen, but now it’s also impossible to tighten the bolt back, leading to an awful clunk noise when driving.
I’m at wits end here, one of the more frustrating things I’ve run into with this car. Any other tips? Anyone else had this issue?
No matter what we tried, it would just keep spinning. The Allen key stays in place but it still won’t budge when turning the wrench. Sockets couldn’t bust it, impact wrench couldn’t bust it, tried just about everything I could think of.
The problem now is not only that the lowering springs didn’t happen, but now it’s also impossible to tighten the bolt back, leading to an awful clunk noise when driving.
I’m at wits end here, one of the more frustrating things I’ve run into with this car. Any other tips? Anyone else had this issue?
Sponsored