Strange sound with milltek ec approved exhaust

[02SilverSiHB]

I deleted my muffler comment cause it could be the middle resonator. So lets wait for him to comment.

Yeah he replied and said muffler at first I thought he was saying he removed one of his resonators.

Also my dumb phone messes up on my replies and they dont make sense when I go back to see what my reply looks like...damn Samsung s7 is getting slow...probably all that porn

Sponsored

 

[FK8_Ger]

No i removed the big resornator with the 3 tips... And than it was gone ..

 

[FK8_K20c1]

Yeah he replied and said muffler at first I thought he was saying he removed one of his resonators.

Also my dumb phone messes up on my replies and they dont make sense when I go back to see what my reply looks like...damn Samsung s7 is getting slow...probably all that porn

Lmfao my Iphone Xs Max is porn proof switch over

 

[FK8_K20c1]

No i removed the big resornator with the 3 tips... And than it was gone ..

We call that muffler and we call resonators the other 2 by the middle of the car and after the downpipe

 

[02SilverSiHB]

We call that muffler and we call resonators the other 2 by the middle of the car and after the downpipe

Yeah...apparently it's something they call it overseas. On millteks site they call it a hollowtek rear silencer lol

 

[FK8_K20c1]

Yeah...apparently it's something they call it overseas. On millteks site they call it a hollowtek rear silencer lol

Oh okay. Well bad news for me I discovered that my front pipe and the clamp after the first resonator were leaking after fixing them my sputtering issue got worse.

 

[FK8_Ger]

We call that muffler and we call resonators the other 2 by the middle of the car and after the downpipe

Than i mean the muffler with the 3 tips.

 

[02SilverSiHB]

Oh okay. Well bad news for me I discovered that my front pipe and the clamp after the first resonator were leaking after fixing them my sputtering issue got worse.

I just attempted to put my milltek back on. Damn if one of the slip on area of the exhaust isnt bent slightly...making it impossible to slip back on. I'll have to work on it another day in the basement. I had the stock exhaust off and ready to go...what a waste

 

[FK8_K20c1]

I just attempted to put my milltek back on. Damn if one of the slip on area of the exhaust isnt bent slightly...making it impossible to slip back on. I'll have to work on it another day in the basement. I had the stock exhaust off and ready to go...what a waste

Yeap been there.

 

[02SilverSiHB]

Yeap been there.

Did you have issues getting the pipes back on after removing it?

I have a slight dent in one pipe from when I was prying it off (when I took it off a few months ago). Now I cant slip one of the pipes on because of that. The dent is just inside past the area where there are those flexable ends of the pipe

 

[FK8_K20c1]

Did you have issues getting the pipes back on after removing it?

I have a slight dent in one pipe from when I was prying it off (when I took it off a few months ago). Now I cant slip one of the pipes on because of that. The dent is just inside past the area where there are those flexable ends of the pipe

I had issues yes, but I did not had a dent. I used wd40 and try to pryed open with my fingers.

 

[02SilverSiHB]

I had issues yes, but I did not had a dent. I used wd40 and try to pryed open with my fingers.

Yeah I'm not even sure how it has a dent. I think when prying I did it too much when removing it originally.

 

[FK8_K20c1]

Yeah I'm not even sure how it has a dent. I think when prying I did it too much when removing it originally.

 

[FK8_Ger]

I figure out that it is very importand that the slip on areas have no damage or dents on the last smal pipe between the silencer and the muffler.. Big dents because of a very tighten clamp will improve much of turbulence in the last muffler wich make this intermittend missfire sound.. Try it to get back a round slipon area without a dent if you tighten the 2 pipes.!.

Here is the muffler entry and your can See the 2 weldet pipes wich goes to the right and left Tips.

 

[Honda_Elite]

I have the part resonated system installed on mine and I hear a “exhaust flowing noise” only when full throttle and upper rpms. I was also wondering what exactly the noise was but I’m pretty sure it related to the muffler.

Sponsored