bendrich
Senior Member
- Joined
- Jun 4, 2017
- Threads
- 23
- Messages
- 71
- Reaction score
- 70
- Location
- Brighton, MA
- Vehicle(s)
- 2018 Subaru Impreza HB :'(
- Vehicle Showcase
- 1
- Thread starter
- #1
I have a pair of brand new one-way brake bleed valves for Non-SI and Non-R front brake calipers. SB1010 is the SpeedBleeder PN. The specs are M10x1.0 and 34.44mm long. The thread pitch is the same for the rears, but THESE WILL NO FIT THE REARS! THEY ARE TOO LONG. The hex is SAE even though the thread is metric.
If you have never used SpeedBleeders before, these are LIFE CHANGING when it comes to doing brakes jobs.
I have no need for these as I changed my front calipers for Acura RL 4 pistons and they had a different bleed valve spec.
Cover the shipping cost and they are yours!
Please ignore my skinny girl fingers. PS if you need help working on your Z32 in SLC area, I'm your man.
If you have never used SpeedBleeders before, these are LIFE CHANGING when it comes to doing brakes jobs.
I have no need for these as I changed my front calipers for Acura RL 4 pistons and they had a different bleed valve spec.
Cover the shipping cost and they are yours!
Please ignore my skinny girl fingers. PS if you need help working on your Z32 in SLC area, I'm your man.
Last edited: