- First Name
- Tyler
- Joined
- Jul 14, 2020
- Threads
- 137
- Messages
- 854
- Reaction score
- 307
- Location
- Harrisburg, PA
- Vehicle(s)
- 2017 Civic Si coupe
- Build Thread
- Link
- Thread starter
- Banned
- #1
Traded in my 2017 EX-T with a cvt and 106k miles(gave me wat i owed on it, for this 2017 Si with 47k.
like 4 days later, i was driving to delaware to meet for parts.
right now
ktuner v2 touch(factory/21.5psi tune) tsp stage 1(map 3 all the time)
35% tint all around and a 1% banner
Thermal R&D 3in catback(hatch) exhaust. still trying to get someone to cut and weld the mounts where i need them.
Prl Cobra Cai (street)
mishimoto intercooler with pipes
Actuity short throw, centering spring, rocker arm and base bushings
Type r o subframe brace
aluminum skidplate
firestone firehawk indy 500s 235/45/18s
spray tinted the reverse lights.
(i think thats it atm)
oh and smoked corner lights
and a mesh grille
Dc sports weighted shift knob
catless downpipe
enkei tm7 18x8 +45
whiteline 26mm rsb w/ adjustable end links
New new
Torque solutions rear mount
Rzcrew intake manifold
eibach sportlines
prl stage 1 intake
20mm wheel spacers
amsoil syncromesh in the trans
mobil 1 extended performance oil and filter
honda brake fluid and coolant
hopefully soon ill have some whiteline lowering springs, led fog lights, cold air intake. and some other odds and ends
but trying to keep it simple and clean
my 16 ext was a bit cleaner. this one came from new york. so it has all the bolts and such white from salt and what nots.
but my 16 also had a new passenger side, and bumpers. due to what i believe was itself parking against a rock.(no clue what happened)
Next thing is what i cant decide
like 4 days later, i was driving to delaware to meet for parts.
right now
ktuner v2 touch
35% tint all around and a 1% banner
Thermal R&D 3in catback(hatch) exhaust. still trying to get someone to cut and weld the mounts where i need them.
Prl Cobra Cai (street)
mishimoto intercooler with pipes
Actuity short throw, centering spring, rocker arm and base bushings
Type r o subframe brace
aluminum skidplate
firestone firehawk indy 500s 235/45/18s
spray tinted the reverse lights.
(i think thats it atm)
oh and smoked corner lights
and a mesh grille
Dc sports weighted shift knob
catless downpipe
enkei tm7 18x8 +45
whiteline 26mm rsb w/ adjustable end links
New new
Torque solutions rear mount
Rzcrew intake manifold
eibach sportlines
20mm wheel spacers
amsoil syncromesh in the trans
mobil 1 extended performance oil and filter
honda brake fluid and coolant
hopefully soon ill have some whiteline lowering springs, led fog lights, cold air intake. and some other odds and ends
but trying to keep it simple and clean
my 16 ext was a bit cleaner. this one came from new york. so it has all the bolts and such white from salt and what nots.
but my 16 also had a new passenger side, and bumpers. due to what i believe was itself parking against a rock.(no clue what happened)
Next thing is what i cant decide
Sponsored
Last edited: